LK Automation Limited
Grid
List
MITSUBISHI
Melsecnet interface module
A1SJ71AP21GE
PLC station distance: 2Km. Cable type: GI-62.5/125.
Melsecnet interface module
A1SJ71AP21GE
PLC station distance: 2Km. Cable type: GI-62.5/125.
MITSUBISHI
Melsecnet interface module
A1SJ71AR21
PLC station distance: 500M. Cable type: coaxial cable.
Melsecnet interface module
A1SJ71AR21
PLC station distance: 500M. Cable type: coaxial cable.
MITSUBISHI
Melsecnet interface module
A1SJ71AT21B
Cable type: twisted pair cable. The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.
Melsecnet interface module
A1SJ71AT21B
Cable type: twisted pair cable. The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.
MITSUBISHI
Melsecnet remote interface module
A1SJ72T25B
By MELSECNET/B I/O can be decentralized control. In a main PLC station this module can control up to 512 I/O points.
Melsecnet remote interface module
A1SJ72T25B
By MELSECNET/B I/O can be decentralized control. In a main PLC station this module can control up to 512 I/O points.
MITSUBISHI
Master control module
A1SJ71PT32-S3
Cable type: cable or twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
Master control module
A1SJ71PT32-S3
Cable type: cable or twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
MITSUBISHI
Master control module
A1SJ71T32-S3
Cable type: twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
Master control module
A1SJ71T32-S3
Cable type: twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
MITSUBISHI
High speed interrupt module
A1SI61
A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.
High speed interrupt module
A1SI61
A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.
MITSUBISHI
I/O bus monitoring module
A1SS91
A1SS91 is used to insert a fixed control program in front of the user program to monitor the specific Y output. Monitoring is carried out only when the CPU is in a state of running or stopping, and the monitoring failure is monitored in the suspended state.
I/O bus monitoring module
A1SS91
A1SS91 is used to insert a fixed control program in front of the user program to monitor the specific Y output. Monitoring is carried out only when the CPU is in a state of running or stopping, and the monitoring failure is monitored in the suspended state.
MITSUBISHI
Pulse capture module
A1SP60
The A1SP60 pulse capture module is a 16 point DC24V input module, Can be used as a general input module, Can also be used as a pulse capture module, Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms, Once there is a pulse signal input, the state is memory, A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation, Input can be set to 4 blocks, Each block can be set to a general function or pulse capture function.
Pulse capture module
A1SP60
The A1SP60 pulse capture module is a 16 point DC24V input module, Can be used as a general input module, Can also be used as a pulse capture module, Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms, Once there is a pulse signal input, the state is memory, A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation, Input can be set to 4 blocks, Each block can be set to a general function or pulse capture function.
MITSUBISHI
Analog timer module
A1ST60
A1ST60 analog timer module has 8 analog timers. Each timer can be set between 0.
Analog timer module
A1ST60
A1ST60 analog timer module has 8 analog timers. Each timer can be set between 0.