For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Connector for connecting a serial port (1)128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface GLC100-DIOCN01 GLC100-DIOCN01 The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.Portable GP2000H series models accessories, RS-422 single head cable (10 m).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set) Proface GLC100-DIOCN01. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.7.0/7.5 inch screen protective cover (1 pieces)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface GLC100-DIOCN01. The PC adapter for PCMCIA slot read CF card required.A veneer, for the GP4000 series back loading models of full flush (white, 1)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface DIO connector Proface DIO connector. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeDisposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)A connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface DIO connector. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) GLC100-DIOCN01. COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interfacee to the COM1 interface of the man-machine interface Proface GLC100-DIOCN01. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface