The MITSUBISHI Q series PLC is connected to GP, length: 5 m.7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes.LT4000M (module type DIO), NPN output, DC24V (host).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface GP37W2-DF00 GP37W2-DF00 2 / setsCOM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface7.0/7.5 inch screen protective cover (1 pieces)The MITSUBISHI A series PLC is connected to GP, length: 5 m Proface GP37W2-DF00. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.GP2500S use1-0 DVI standard (DVI-D 24 pin convex connector)The main controller is connected to the man-machine interface for MPI communicationWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface GP37W2-DF00. (1)Connector for connecting DC power cord (5 / set).Portable GP2000H series models accessories, RS-232 single head cable (3 m).A1/A2/B+ DIO Type connector (welding type) (5 / set)Used to connect the 2-Port adapter to GP4000Standard cable for connecting GP3000H adapter and GP3000H Proface Screen protection film.
Length: 3 meters. Engineering documents created by the LT interface to download images and logic programming software through the USB interface Proface Screen protection film. For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.For the man-machine interface hanging in the neck lanyard.15 inches, replaced by a host of backlight (1).GP3000H portable slingStandard cable for connecting GP3000H adapter and GP3000H Proface Screen protection film.
Length: 10 meters. Slave station module for connecting support for CANopenGP3000H replacement label (5 sheets / set)For 3 GP37W2-DF00. 8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectoors Proface GP37W2-DF00.
Length: 3 meters. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.