LT4000M (module type DIO), PNP output, DC24V (host).I/O expansion module, including the 8 point relay /1 public endFor the man-machine interface hanging in the neck lanyard.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface PSL-DF00. (2 / set)Used to install the man-machine interface to the fixed panel PSL-DF00 (4 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Portable GP2000H series models accessories, RS-422 single head cable (3 m).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).For connecting GP operation data with RS-422 and power /DIO terminals Proface PSL-DF00. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.The main controller is connected to the man-machine interface for MPI communication1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface PSL-DF00. Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface Screen protection film.
Length of 5 meters. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface Screen protection film. (1)Use external output for the GP3000 series of auxiliary connectors (5 / sets).B/B+/C FLEX NETWORK Type connector (5)12.1 inches, replaced by a host of backlight (1).Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / setts)10 Proface Screen protection film PSL-DF00. 4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.The man-machine interface directtly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface PSL-DF00. OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.