The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.A veneer, for the GP4000 series back loading models of full flush (white, 1)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface PS300-BU00. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function PS300-BU00 (1)LT4000M (module type DIO), NPN output, DC24V (host).512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.For connecting GP operation data with RS-422 and power /DIO terminals Proface PS300-BU00. Touch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.I/O module, including 32 point NPN/PNP inputThe main controller is connected to the man-machine interface for MPI communicationSuitable for GLC2300 series10 Proface PS300-BU00. 4 inches (TFT), the replacement of the host backlight (1).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface Backlight Proface Backlight. With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Connect to USB printer (Type-B).Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 pointt transistor PNP output Proface Backlight PS300-BU00. Up to 7 EX modules can be connected.7.0/7.5 inch screen protective cover (1 pieces)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Some types off PLC are not connected Proface PS300-BU00. Length: 5 meters.Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor output5 / sets