LK Automation Limited
OMRON E2E2-X8MD1 provided as a standard feature OMRON E2E2-X8MD1
Brand:
OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X8MD1
Appearance: Unshielded, M12.
Sensing distance: 8 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X8MD1
Appearance: Unshielded, M12.
Sensing distance: 8 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
Sensing method: Through beam (Emitter + Receiver).
Connection method: Connector (M8, 4 pins).
Sensing distance: 0.8 m (apertures built in).
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits OMRON E2E2-X8MD1 E2E2-X8MD1
Certified by Ecolab Europe. Sensing method: Diffuse-reflective Sensors.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 700 mm.
Functions: Timer Self Diagnosis .
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver) OMRON E2E2-X8MD1.
Sensing distance: 40 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) OMRON E2E2-X8MD1.
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup OMRON Long-barrel Inductive Proximity Sensor. )
Models with infrared LEDs are also available. Pressure range: Positive pressure; 0 to 1 MPa OMRON Long-barrel Inductive Proximity Sensor.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes OMRON Long-barrel Inductive Proximity Sensor.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 288 × 28 × 29 mm E2E2-X8MD1.
Only in hysteresis mode. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions OMRON E2E2-X8MD1.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
Connection method: Connector (M8, 4 pins).
Sensing distance: 0.8 m (apertures built in).
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits OMRON E2E2-X8MD1 E2E2-X8MD1
Certified by Ecolab Europe. Sensing method: Diffuse-reflective Sensors.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 700 mm.
Functions: Timer Self Diagnosis .
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver) OMRON E2E2-X8MD1.
Sensing distance: 40 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) OMRON E2E2-X8MD1.
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup OMRON Long-barrel Inductive Proximity Sensor. )
Models with infrared LEDs are also available. Pressure range: Positive pressure; 0 to 1 MPa OMRON Long-barrel Inductive Proximity Sensor.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes OMRON Long-barrel Inductive Proximity Sensor.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 288 × 28 × 29 mm E2E2-X8MD1.
Only in hysteresis mode. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions OMRON E2E2-X8MD1.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
...More relevant models >>>>