LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
GP37W2-WP00-MS Proface Waterproof rubber gasket GP37W2-WP00-MS
Brand: Proface
Name: Waterproof rubber gasket
Model: GP37W2-WP00-MS
LT seal on the control panel.

Touch screen anti ultraviolet protective film (1 pieces).LT4000M (module type DIO), PNP output, DC24V (host).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceCable for connecting GP3000 to various modules7 Proface GP37W2-WP00-MS GP37W2-WP00-MS 4 inches, installed to provide the function of dust and moistureCOM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector7.4 inches, replace the backlight (1 / set)10.4 inches (TFT), the replacement of the host backlight (1).Converting SIO to RS-422 terminal blockFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface GP37W2-WP00-MS. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. Used to connect the SIEMENS S5 PLC series to the host computer interface12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface GP37W2-WP00-MS. Suitable for A/B+ Type modelsCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface Waterproof rubber gasket. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface Waterproof rubber gasket.
Length of 5 meters. GP3000H replacement label (5 sheets / set)COM1 interface with the cable for direct connection to the CPU series PLC A10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).Cable for connecting GP3000 to various modulesThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module PProface Waterproof rubber gasket GP37W2-WP00-MS. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.COM1 interface with the cable for direct connection to the CPU seriess PLC QA veneer, for the GP4000 series back loading models of full flush (white, 1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface GP37W2-WP00-MS.


...More relevant models >>>>
Last one: GP070-AT01
next one: FN-IFCN01