7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeFor the operation screen (5 pieces) (GP3000H standard).5 / setsApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface GP2000H-D422-10M.
Length of 10 meters GP2000H-D422-10M Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Length: 5 meters.For multi connection communication, length: 5 meters.Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Used to connect the 2-Port adapter to GP4000With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface GP2000H-D422-10M. (2 / set)5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.COM2 adapter for converting the COM2 interface to the RS-422 terminal blockPortable GP2000H series models accessories, RS-232 single head cable (3 m) Proface GP2000H-D422-10M. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter Proface RS-422 cable with D-Sub connector Proface RS-422 cable with D-Sub connector. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).7.0/7.5 inch screen protective cover (1 pieces)15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface RS-422 cable with D-Sub connector. Note: joints A and B are different, the joints C and D different.12.1 inches, replace the backlight (1 / set)Length: 5 meters.COM2 terminal adapter for coommunication through the RS-422/485 connectionSuitable for LT4000M/GP4000M series modules, 3 GP2000H-D422-10M. 5 inch.Touch panel operation for RGB input modules (Master - from: Mini-B)The module is used for mounting on the back board of the GLC2000 series host computer Proface GP2000H-D422-10M. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.