Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceAUX connector for external output (5 / set).Connector for connecting DC power cord. (right angle, 5 / set)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)15 inches, replaced by a host of backlight (1) Proface GP2000H-C232-3M. GP3000H replacement label (5 sheets / set)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals GP2000H-C232-3MThe MITSUBISHI Q series PLC is connected to GP, length: 5 m.For the elastic display module installation nut wrench (1 / set).7.0/7.5 inch screen protective cover (1 pieces)COM1 interface with the cable for direct connection to the CPU series PLC QUsed to convert the USB interface to the serial interface (RS-232C) Proface GP2000H-C232-3M. A modem or bar code reader that can be connected to support RS-232C.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)2 / setsSuitable for GLC2300 series10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface GP2000H-C232-3M. Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationStandard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters Proface RS-232 single head cable. Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) Proface RS-232 single head cable. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.LT4000M (module type analog), PNP output, DC24V (host).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface RS-232 single headd cable GP2000H-C232-3M. Connect to PC, transfer screen data and user programs.Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Some types of PLC are not connectted Proface GP2000H-C232-3M. Length: 5 meters.Converting SIO to RS-422 terminal blockA connector that connects the DIO interface for connecting an external I/O device (5 sets).