LK Automation Limited
E3JK-DP11 2M Built-in Power Supply Photoelectric Sensor Long-distance Photoelectric Sensor OMRON E3JK-DP11 2M
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DP11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DP11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 49 (65).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E3JK-DP11 2M.
Problems such as the collision of workpieces are eliminated E3JK-DP11 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Flat Unshielded.
Sensing distance: 10 mm.
Output configuration: DC 3-wire NPN.
Model/Operation mode: NO.
Flat Capacitive Sensor with a.
Thickness of Only 10 mm OMRON E3JK-DP11 2M.
Flat Sensor with excellent space efficiency.
(Model with built-in Amplifier is only 10 mm thick.)
Direct mounting onto a metallic surface is possible. The photoelectric sensor with the screw thread, the optical sensor and the sensor with the appearance of the proximity sensor has high anti-interference ability of the photoelectric -IC technology.
New photoelectric -IC, to increase the anti interference
Column cover M18DIN- size, ABS /BRASS resin box shell
With a long sensing distance (30cm), reflective products with a sensitivity adjuster
Short circuit protection and reverse connection protectionName: Tape reflector OMRON E3JK-DP11 2M.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C OMRON Built-in Power Supply Photoelectric Sensor.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85% OMRON Built-in Power Supply Photoelectric Sensor.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: --. Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-reesistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OOMRON Built-in Power Supply Photoelectric Sensor OMRON E3JK-DP11 2M E3JK-DP11 2M.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9.
Sensing distance: 2.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 49 (65).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E3JK-DP11 2M.
Problems such as the collision of workpieces are eliminated E3JK-DP11 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Flat Unshielded.
Sensing distance: 10 mm.
Output configuration: DC 3-wire NPN.
Model/Operation mode: NO.
Flat Capacitive Sensor with a.
Thickness of Only 10 mm OMRON E3JK-DP11 2M.
Flat Sensor with excellent space efficiency.
(Model with built-in Amplifier is only 10 mm thick.)
Direct mounting onto a metallic surface is possible. The photoelectric sensor with the screw thread, the optical sensor and the sensor with the appearance of the proximity sensor has high anti-interference ability of the photoelectric -IC technology.
New photoelectric -IC, to increase the anti interference
Column cover M18DIN- size, ABS /BRASS resin box shell
With a long sensing distance (30cm), reflective products with a sensitivity adjuster
Short circuit protection and reverse connection protectionName: Tape reflector OMRON E3JK-DP11 2M.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C OMRON Built-in Power Supply Photoelectric Sensor.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85% OMRON Built-in Power Supply Photoelectric Sensor.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: --. Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-reesistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OOMRON Built-in Power Supply Photoelectric Sensor OMRON E3JK-DP11 2M E3JK-DP11 2M.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9.
...More relevant models >>>>