LK Automation Limited
E3JK-DN11 2M OMRON Built-in Power Supply Photoelectric Sensor E3JK-DN11 2M
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Model: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Advanced algorithms to achieve ultra high speed and ultra high flexibility
In the past, the visual sensor is more difficult to check; the location becomes very simple!
QUEST text check OMRON E3JK-DN11 2M E3JK-DN11 2M
Precision picture comparison.
High speed production line speed, more and more stringent quality requirements.
Does not need to stop the production line, carries on the non stop adjustment. Appearance: Standard.
Sensing method: Through-beam type (with slot) OMRON E3JK-DN11 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. E32-T22L type: special beam type; long range / high function,
Features: with 2 cylinder (small),
Shape / detection distance (mm): 540; 440; 250 (100),
Bending radius (mm): R10 OMRON E3JK-DN11 2M.
Standard test object (minimum test object) (mm) 1: 0.9 (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor OMRON Built-in Power Supply Photoelectric Sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type OMRON Built-in Power Supply Photoelectric Sensor.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: NPN.
Action mode: NC. Field of view: C-mount.
Number of pixels: 1.3 million pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to optical chart on p.30..
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all OMRON Built-in Power Supply Photoelectric Sensor.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller E3JK-DN11 2M.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description,, Nut plate;
Material, Stainless steel (SUS304);
Count, 1 OMRON E3JK-DN11 2M.
Applicable sensor (mounting pitch on sensor side): E3T-S (9/15).
Page: Dimensions, 12.
Sensing distance: 2 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Advanced algorithms to achieve ultra high speed and ultra high flexibility
In the past, the visual sensor is more difficult to check; the location becomes very simple!
QUEST text check OMRON E3JK-DN11 2M E3JK-DN11 2M
Precision picture comparison.
High speed production line speed, more and more stringent quality requirements.
Does not need to stop the production line, carries on the non stop adjustment. Appearance: Standard.
Sensing method: Through-beam type (with slot) OMRON E3JK-DN11 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. E32-T22L type: special beam type; long range / high function,
Features: with 2 cylinder (small),
Shape / detection distance (mm): 540; 440; 250 (100),
Bending radius (mm): R10 OMRON E3JK-DN11 2M.
Standard test object (minimum test object) (mm) 1: 0.9 (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor OMRON Built-in Power Supply Photoelectric Sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type OMRON Built-in Power Supply Photoelectric Sensor.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: NPN.
Action mode: NC. Field of view: C-mount.
Number of pixels: 1.3 million pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to optical chart on p.30..
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all OMRON Built-in Power Supply Photoelectric Sensor.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller E3JK-DN11 2M.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description,, Nut plate;
Material, Stainless steel (SUS304);
Count, 1 OMRON E3JK-DN11 2M.
Applicable sensor (mounting pitch on sensor side): E3T-S (9/15).
Page: Dimensions, 12.
...More relevant models >>>>