LK Automation Limited
E3FA-RN12 2M OMRON E3FA-RN12 2M Simplicity Photoelectric sensors
Brand:
OMRON
Name: Photoelectric sensors
Model: E3FA-RN12 2M
Sensor type: Coaxial Retro-reflective with MSR function.
Sensing distance: 0 to 500 mm with E39-R1S.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing.
...More relevant models >>>>
Name: Photoelectric sensors
Model: E3FA-RN12 2M
Sensor type: Coaxial Retro-reflective with MSR function.
Sensing distance: 0 to 500 mm with E39-R1S.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing.
E32-ZD200 detection distance
Pair shootingE3F3-R17M detection methods: Regression reflection type,
Lead extraction: CN M12,
Type: metal appearance; NPN output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyCable length: 4 m OMRON E3FA-RN12 2M.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website E3FA-RN12 2M Appearance: Unshielded.
Sensing distance: 20 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1) OMRON E3FA-RN12 2M.
Aluminum die-cast models also available. Slit width: 1-mm dia.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light OMRON E3FA-RN12 2M.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz OMRON Photoelectric sensors.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available OMRON Photoelectric sensors.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2 OMRON Photoelectric sensors. 2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. E32-TC200 type: special beam type; long range / high function,
Specialty: M4 screw,
Shape / detection distance (mm): 4000; 4000; 2600 (1500),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsPower supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflecttive: 2 E3FA-RN12 2M. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3FA-RN12 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Pair shootingE3F3-R17M detection methods: Regression reflection type,
Lead extraction: CN M12,
Type: metal appearance; NPN output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyCable length: 4 m OMRON E3FA-RN12 2M.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website E3FA-RN12 2M Appearance: Unshielded.
Sensing distance: 20 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1) OMRON E3FA-RN12 2M.
Aluminum die-cast models also available. Slit width: 1-mm dia.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light OMRON E3FA-RN12 2M.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz OMRON Photoelectric sensors.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available OMRON Photoelectric sensors.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2 OMRON Photoelectric sensors. 2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. E32-TC200 type: special beam type; long range / high function,
Specialty: M4 screw,
Shape / detection distance (mm): 4000; 4000; 2600 (1500),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsPower supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflecttive: 2 E3FA-RN12 2M. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3FA-RN12 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>