Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Portable GP2000H series models accessories, RS-422 single head cable (10 m).Cable for connecting GP3000 to various modulesConverting 4 analog signals into digital signalsUsed to convert the USB interface to the serial interface (RS-232C) Proface CA3-MPI-PG1-PFE. A modem or bar code reader that can be connected to support RS-232C CA3-MPI-PG1-PFEA connector that connects the DIO interface for connecting an external I/O device (5 sets).Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. I/O expansion module, including the 8 point relay /1 public endThe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface CA3-MPI-PG1-PFE. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface CA3-MPI-PG1-PFE. Used to install the GP3000H series to a commercially available support arm or panel.USB cable clamp for preventing disconnection of connection (5 / set)I/O module, including 32 point NPN/PNP inputSuitable for LT4000M/GP4000M series modules, 3 Proface SIEMENS MPI cable (3.5 m). 5 inch.Cable for connecting GP3000 to various modules12 Proface SIEMENS MPI cable (3.5 m). 1 inches, replace the backlight (1 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12.1 inches, replaced by a host of backlight (1).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Protection for GP rear connectors (large and small for each of the 1) Proface SIEMENS MPI cable (3 CA3-MPI-PG1-PFE. 5 m). A veneer, for the GP4000 series back loading models of full flush (white, 1)5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).GP4000 series back mounted modeel of waterproof rubber gasket Proface CA3-MPI-PG1-PFE. (1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)