LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
CA3-ATFALL-01 Mounting screw Proface CA3-ATFALL-01 
Brand: Proface
Name: Mounting screw
Model: CA3-ATFALL-01
Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.

The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)5 Proface CA3-ATFALL-01. 7 inch screen protective cover (1 pieces)A1/A2/B+ DIO Type connector (compression type) (5 / set)For RGB input USB cable to prevent disconnection (2 / set)COM2 terminal adapter for communication through the RS-422/485 connectionConnector for connecting DC power cord (5 / set) CA3-ATFALL-01Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointUsed to connect the 2-Port adapter to GP4000For the elastic display module installation nut wrench (1 / set) Proface CA3-ATFALL-01. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceConnector for connecting DC power cord Proface CA3-ATFALL-01. (linear, 5 / set)Used to install the man-machine interface to the fixed panel. (4 / set)The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port Proface Mounting screw. When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Touch screen anti ultraviolet protective film (1 pieces) Proface Mounting screw. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the openiing Proface Mounting screw CA3-ATFALL-01. GP3000H replacement label (5 sheets / set)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Converting 2 analog signals into digital signalsScreen protection cover (1 pieces) for protectiing screen against pollution of man-machine interfaceScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interface


...More relevant models >>>>
Last one: PFXZGECLUSMB1
next one: CA3-MPI-PG1-PFE
Related download