For the QnA/ACPU/ controller CPU (A Series) the bus (2 channel) thin type unit.
Applicable models: GT15, GT16. Applicable models: GT11, HandyGOTCable length: 1m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT GT1155HS-QSBD Manual .
Applicable models: GT10, GT21. Protective film for 4 GT1155HS-QSBD5 inch screen.
Transparent, 5.
Applicable model: GT1030. Cable length: 20m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT.
Connection between serial communication unit (AJ71QC24-R4) and GOT.
Applicable models: GT10, GT21. The control cabinet for additional positive CF port (B disk).
Applicable models: GT16, GT15 GT1155HS-QSBD Manual . "Protective film for 4.7 inch screen.
Transparent, 5.
Applicable model: GT104. For video input (NTSC/PAL) 4ch.
Applicable model: GT27. Cable length: 3.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. For the GT1665M-STB.
Applicable model: GT16. For GOT multipoint connection.
Applicable models: GT15, GT16, GT11, GT10, GT27, GT25, GT23, GT21 GT1155HS-QSBD Manual . 512MB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOT8.4 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Protective film for 8 MITSUBISHI GT1155HS-QSBD User's Manual. 4 inch screen.
Transparent (frame: white), 5.
Applicable model: GT15. Accessories for 5.7 inch models.
Applicable models: GT15, GT11 MITSUBISHI GT1155HS-QSBD User's Manual. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Function: high performance and low price in the middle end model.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color MITSUBISHI GT1155HS-QSBD User's Manual.
Open frame type.
Panel color: white.
Power type: DC24V.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module caan be installed GT1155HS-QSBD .
4, Ethernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine.
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader GT1155HS-QSBD Manual .
7, SD memory card slot
Can save alarm and log data, such as a large number of data.