Cable length: 3 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection GT1155HS-QSBD User's Manual.
Applicable model: GT21. USB interface protection cover on the front panel of the host computer (for replacement) GT1155HS-QSBD
For 15 inches /12.1 inches /10.4 inches /8.4 inches.
Applicable model: GT15. For analog RGB output 1ch (slim module).
Applicable model: GT27. Cable length: 5m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. Protective film for 4 GT1155HS-QSBD User's Manual. 5 inch screen.
Transparent, 5.
Applicable model: GT1030. Cable length: 10 meters.
FXCPU GOT.
FXCPU communication function expansion board GOT.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)].
Applicable model: GT21. Protective film for 5.7 inch screen.
Scrub, 5.
Applicable model: GT11. Protective film for 4.5 inch screen.
Scrub (frame: white), 5.
Applicable model: GT1030. Protective film for 12 GT1155HS-QSBD User's Manual. 1 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15. Cable length: 0.5m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Cable length: 5 MITSUBISHI GT1155HS-QSBD Manual . 0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments MITSUBISHI GT1155HS-QSBD Manual .
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) MITSUBISHI GT1155HS-QSBD Manual .
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT1155HS-QSBD .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1155HS-QSBD User's Manual.