For the GT105 - /GT104 - (operating system for project data transmission).
Applicable model: GT10. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB GT1030-LBD Manual .
Resolution: VGA (640 x 480).
Display device: TFT color (high brightness, wide viewing angle) GT1030-LBD
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port GT1030-LBD Manual .
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface GT1030-LBD Manual .
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water MITSUBISHI GT1030-LBD Gateway Functions Manual MITSUBISHI GT1030-LBD Gateway Functions Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch sscreen,
Users as long as the direction of the re exchange of it MITSUBISHI GT1030-LBD Gateway Functions Manual GT1030-LBD . "Accessories for 10.4 inch models.
Applicable models: GT16, GT15. "Cable length: 10.6m.
Long distance connection betwween CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller GT1030-LBD Manual .
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11.