2GB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOTConversion connector between D-sub 9 pin head and European pin 5 pin.
Applicable models: GT11, GT10. 12.1 inches.
Surface treatment: transparent.
Protective film color: No.
USB protective cover parts: no openings.
Set number: 5.
Applicable model: GT21 MITSUBISHI GT1030-LWDW-C Manual . Cable length: 30m.
For the connection between the two graphic operations GT1030-LWDW-C
Applicable models: GT16, GT15, GT11. Series introduction: with a variety of first type functions and communication interface standard model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black MITSUBISHI GT1030-LWDW-C Manual .
Power type: DC24V.
With a built-in Ethernet communication interface.
Standard model with various pre - and communication interface.
User storage capacity: 9MB.
Device USB interface.
Standard Ethernet, RS-422/485 and RS-232 interface.
The standard SD card interface.
According to the working principle of the touch screen and the transmission of information of the media, the touch screen is divided into four kinds,
They are resistive, capacitive, inductive, infrared, and surface acoustic waves MITSUBISHI GT1030-LWDW-C Manual .
Each touch screen has its own advantages and disadvantages, to understand which kind of touch screen to apply to what kind of occasion,
The key is to understand the working principle and characteristics of each type of touch screen technology. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screenn system GT1030-LWDW-C Extended/Option Functions Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1030-LWDW-C Extended/Option Functions Manual.