LK Automation Limited
ZX1-LD50A81 2M OMRON ZX1-LD50A81 2M Smart Sensor
Brand:
OMRON
Name: Smart Sensor
Model: ZX1-LD50A81 2M
Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 50 ± 10 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
...More relevant models >>>>
Name: Smart Sensor
Model: ZX1-LD50A81 2M
Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 50 ± 10 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON ZX1-LD50A81 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 ZX1-LD50A81 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON ZX1-LD50A81 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensor type: Through-beam.
Sensing distance: 20 m.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models OMRON ZX1-LD50A81 2M.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: M12.
Sensing distance: 5 mm OMRON Smart Sensor.
Connection method: M12 Connector Models .
Cable specifications: --.
Operation mode : NO .
Pin arrangement: (3, 4): (AC, AC).
Applicable connector code: E OMRON Smart Sensor.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON Smart Sensor.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Appearance: T-shaped.
Senssing method: Through-beam type (with slot) ZX1-LD50A81 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that iis still easy to use OMRON ZX1-LD50A81 2M.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON ZX1-LD50A81 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 ZX1-LD50A81 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON ZX1-LD50A81 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensor type: Through-beam.
Sensing distance: 20 m.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models OMRON ZX1-LD50A81 2M.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. Appearance: M12.
Sensing distance: 5 mm OMRON Smart Sensor.
Connection method: M12 Connector Models .
Cable specifications: --.
Operation mode : NO .
Pin arrangement: (3, 4): (AC, AC).
Applicable connector code: E OMRON Smart Sensor.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON Smart Sensor.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature. Appearance: T-shaped.
Senssing method: Through-beam type (with slot) ZX1-LD50A81 2M.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that iis still easy to use OMRON ZX1-LD50A81 2M.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
...More relevant models >>>>