I/O expansion module, including the 8 point relay /1 public endProvide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)GP4000 series back mounted model of waterproof rubber gasket Proface ZC9CBFX51. (1)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block ZC9CBFX51Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters Proface ZC9CBFX51. Touch screen anti ultraviolet protective film (1 pieces).12.1 inches, replaced by a host of backlight (1).5.7 inches, replace the backlight (1 / set)Engineering documents created by the LT interface to download images and logic programming software through the USB interface.LT4000M (module type analog), NPN output, DC24V (host).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface ZC9CBFX51. 128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Converting SIO to RS-422 terminal blockThe main controller is connected to the man-machine interface for MPI communication10 Proface MITSUBISHI motor FX PLC series CPU connection cable (5 m) Proface MITSUBISHI motor FX PLC series CPU connection cable (5 m). 4 inches (TFT), the replacement of the host backlight (1).7.4 inches, installed to provide the function of dust and moisture15 inches, replaced by a host of backlight (1).Used to display analog RGB (2 channels) on the GP3000For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface MITSUBISHI motor FX PLC series CPU conneection cable (5 m) ZC9CBFX51. GP2500S useStandard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. Connector for connecting DC power cord. (linear, 5 / set)Disposable film (5 sheets / sets) for protecting screen against coontamination of human computer interface Proface ZC9CBFX51. Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station