LK Automation Limited
XW2D-34X6 Slim Connector-Terminal Block Conversion Units OMRON XW2D-34X6
Brand:
OMRON
Name: Slim Connector-Terminal Block Conversion Units
Model: XW2D-34X6
Mounted Connector: MR Sockets.
No. of poles: 34.
Dimension A: 128.
Dimension B: 100.
Mounted Connector model: MR-34RFD2 *3.
Cable Connector model: MR-34M *3.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to downsizing,
control panels and automatic equipment.
Fallout prevention for terminal screws.
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachment and removal.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers.
...More relevant models >>>>
Name: Slim Connector-Terminal Block Conversion Units
Model: XW2D-34X6
Mounted Connector: MR Sockets.
No. of poles: 34.
Dimension A: 128.
Dimension B: 100.
Mounted Connector model: MR-34RFD2 *3.
Cable Connector model: MR-34M *3.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to downsizing,
control panels and automatic equipment.
Fallout prevention for terminal screws.
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachment and removal.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers.
No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Straight.
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch OMRON XW2D-34X6.
Ideal for a wide variety of FA and OA applications XW2D-34X6
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Model: PY (back-mounting), page 15, PCB terminals.
Number of pins: 14 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON XW2D-34X6.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Configuration: Covered Power Supplies.
Input voltage: 100 to 240 VAC (free) (80 to 370 VDC *).
S8JX-G15005@@:Switchable between 100 to 120 VAC and 200 to 240 VAC.
(DC power cannot be input.).
Power ratings: 50 W.
Output voltage: 5 V.
Output current: 10 A.
Built-in fan: No OMRON XW2D-34X6.
Easy-to-use, Widely range from 15 W to 600 W (Output Voltage: 5 V to 48 V).
Easy Mounting: Front-mounted type, DIN rail-mounted type are available.
Screw-mount at the top. (except 300-/600-W models).
Safety standards: UL 508/60950-1, cUL CSA C22.2 No. 107.1,
cUR CSA C22.2 No. 60950-1.
EN 50178 (= VDE 0160) Over voltage OMRON Slim Connector-Terminal Block Conversion Units.
category III.
EN 60950-1 (= VDE 0805 Teil 1).
EMC: Conforms to EN 61204-3.
(EMI:EN55011 ClassA) OMRON Slim Connector-Terminal Block Conversion Units.
Input conditions: The input voltage range of 15-W, 35-W,
50-W, 100-W, and 150-W models has,
been increased to 80 to 370 VDC (EC Directives and safety standards do not apply.).Sensing distance: 5 to 100 mm.
Smart Static Electricity Sensing: Making Static Electricity Visible.
Compact sensor head and smart digital amplifier measure,
the electrostatic charge quantity of workpieces at all times OMRON Slim Connector-Terminal Block Conversion Units.
Multi-point measurements and data logging of the static,
electricity quantity can be performed easily.
Best long-distance, high-precision measurements in the industry. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indiccated from the start of operation XW2D-34X6.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XW2D-34X6. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
Item: Vibration-proof robot cable.
Cable connection direction: Straight.
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch OMRON XW2D-34X6.
Ideal for a wide variety of FA and OA applications XW2D-34X6
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Model: PY (back-mounting), page 15, PCB terminals.
Number of pins: 14 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON XW2D-34X6.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Configuration: Covered Power Supplies.
Input voltage: 100 to 240 VAC (free) (80 to 370 VDC *).
S8JX-G15005@@:Switchable between 100 to 120 VAC and 200 to 240 VAC.
(DC power cannot be input.).
Power ratings: 50 W.
Output voltage: 5 V.
Output current: 10 A.
Built-in fan: No OMRON XW2D-34X6.
Easy-to-use, Widely range from 15 W to 600 W (Output Voltage: 5 V to 48 V).
Easy Mounting: Front-mounted type, DIN rail-mounted type are available.
Screw-mount at the top. (except 300-/600-W models).
Safety standards: UL 508/60950-1, cUL CSA C22.2 No. 107.1,
cUR CSA C22.2 No. 60950-1.
EN 50178 (= VDE 0160) Over voltage OMRON Slim Connector-Terminal Block Conversion Units.
category III.
EN 60950-1 (= VDE 0805 Teil 1).
EMC: Conforms to EN 61204-3.
(EMI:EN55011 ClassA) OMRON Slim Connector-Terminal Block Conversion Units.
Input conditions: The input voltage range of 15-W, 35-W,
50-W, 100-W, and 150-W models has,
been increased to 80 to 370 VDC (EC Directives and safety standards do not apply.).Sensing distance: 5 to 100 mm.
Smart Static Electricity Sensing: Making Static Electricity Visible.
Compact sensor head and smart digital amplifier measure,
the electrostatic charge quantity of workpieces at all times OMRON Slim Connector-Terminal Block Conversion Units.
Multi-point measurements and data logging of the static,
electricity quantity can be performed easily.
Best long-distance, high-precision measurements in the industry. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indiccated from the start of operation XW2D-34X6.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XW2D-34X6. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
...More relevant models >>>>