LK Automation Limited
XW2B-80J7-12A OMRON The servo relay unit OMRON XW2B-80J7-12A
Brand:
OMRON
Name: The servo relay unit
Model: XW2B-80J7-12A
Servo trunk unit.
Product Name: servo relay unit.
Application unit: FQM1-MMA22/MMP22.
Specifications: servo drive G5/G series /SMARTSTEP2.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and control signal of position control unit,
Simple wiring on terminal stage.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installation, screw installation of two methods.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
...More relevant models >>>>
Name: The servo relay unit
Model: XW2B-80J7-12A
Servo trunk unit.
Product Name: servo relay unit.
Application unit: FQM1-MMA22/MMP22.
Specifications: servo drive G5/G series /SMARTSTEP2.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and control signal of position control unit,
Simple wiring on terminal stage.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installation, screw installation of two methods.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
Power supply voltage: 100 to 240 VAC.
Heater control method: Phase control Cyclic control.
Input specifications: Two current inputs,
(for either single phase or threephase).
Output specifications: One relay output.
Communications output: RS-485.
Current input range: 20.0 to 200.0 A.
A high-precision Heater Element OMRON XW2B-80J7-12A.
Burnout Detector compatible with a,
wide-range of heater control methods XW2B-80J7-12A
Push-in terminals reduce the workload.
Scaling.
NPN or PNP equivalent output.
Lineup includes models compatible with many heater control methods,
including ON/OFF control, phase control, and cyclic control.
High-precision heater burnout alarm with digital measurement.
Contributes to preventative maintenance OMRON XW2B-80J7-12A.
If the gate function is disabled, the gate input can be used as an,
undercurrent/overcurrent relay or for motor or lamp loads.
Undercurrent detection values can be set separately for CT1 and CT2.
CE marking and cUL certified (K8AC-H2@@@). Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 24 VAC/DC.
Ideal for voltage monitoring for industrial OMRON XW2B-80J7-12A.
facilities and equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and,
undervoltages.
Manual resetting and automatically resetting supported by one Relay OMRON The servo relay unit.
Pre-alarm Monitoring Mode.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported OMRON The servo relay unit.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Output voltage: 24 V.
Output current: 2.5 A.
Screw terminal Model: With Bus Line (See note 1.).
Block-type Switch Mode Power Supply That OMRON The servo relay unit.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models).
One model covers 60 to 240 W (24-V models).
Easy creation of multi-power supply configurrations with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels) XW2B-80J7-12A.
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditioons: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable OMRON XW2B-80J7-12A. )
Operating temperatures to –20°C (24-V models).
Heater control method: Phase control Cyclic control.
Input specifications: Two current inputs,
(for either single phase or threephase).
Output specifications: One relay output.
Communications output: RS-485.
Current input range: 20.0 to 200.0 A.
A high-precision Heater Element OMRON XW2B-80J7-12A.
Burnout Detector compatible with a,
wide-range of heater control methods XW2B-80J7-12A
Push-in terminals reduce the workload.
Scaling.
NPN or PNP equivalent output.
Lineup includes models compatible with many heater control methods,
including ON/OFF control, phase control, and cyclic control.
High-precision heater burnout alarm with digital measurement.
Contributes to preventative maintenance OMRON XW2B-80J7-12A.
If the gate function is disabled, the gate input can be used as an,
undercurrent/overcurrent relay or for motor or lamp loads.
Undercurrent detection values can be set separately for CT1 and CT2.
CE marking and cUL certified (K8AC-H2@@@). Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 24 VAC/DC.
Ideal for voltage monitoring for industrial OMRON XW2B-80J7-12A.
facilities and equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and,
undervoltages.
Manual resetting and automatically resetting supported by one Relay OMRON The servo relay unit.
Pre-alarm Monitoring Mode.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported OMRON The servo relay unit.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Output voltage: 24 V.
Output current: 2.5 A.
Screw terminal Model: With Bus Line (See note 1.).
Block-type Switch Mode Power Supply That OMRON The servo relay unit.
Mounts to DIN Rail.
One model covers 30 to 120 W (12-V models).
One model covers 60 to 240 W (24-V models).
Easy creation of multi-power supply configurrations with different,
output power supplies connected together (5-V, 12-V, and 24-Vmodels) XW2B-80J7-12A.
Improve power supply system reliability by creating N+1 redun,
dant systems (12-V and 24-V models).
RoHS-compliant.
Input conditioons: 80 to 370 VDC supported for DC input too,
(EC Directives and safety standards are not applicable OMRON XW2B-80J7-12A. )
Operating temperatures to –20°C (24-V models).
...More relevant models >>>>
Related download