LK Automation Limited
XS5R-D426-C11-F OMRON XS5R-D426-C11-F
Brand:
OMRON
Name: Round Water-resistant Connectors
Model: XS5R-D426-C11-F
Cable: With cable.
Connector: Connectors on both cable ends.
Cable length: 1 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved.
...More relevant models >>>>
Name: Round Water-resistant Connectors
Model: XS5R-D426-C11-F
Cable: With cable.
Connector: Connectors on both cable ends.
Cable length: 1 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved.
No. of inputs: 16.
No. of poles: 20.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Common terminal provided.
Use for either PLC Input Unit or Output,
Unit merely by changing short bar. Type: open type.
Structure: bottom mounting type.
Capacity: 100W.
Output voltage: 5V OMRON XS5R-D426-C11-F.
Output current: 20A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device XS5R-D426-C11-F
Built in support for determining the abnormal causes of the new under voltage detection function.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products OMRON XS5R-D426-C11-F.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer OMRON XS5R-D426-C11-F. )
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
Type: S8JC-Z series models list.
Meet the criteria: No.
Configuration: power supply with cover; DIN guide rail mounting OMRON Round Water-resistant Connectors.
Input voltage: 50W.
Output voltage: 5VDC.
Output current: 10.0A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market OMRON Round Water-resistant Connectors.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time. Servo trunk unit.
Product Name: servo relay unit OMRON Round Water-resistant Connectors.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and controol signal of position control unit,
Simple wiring on terminal stage XS5R-D426-C11-F.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON XS5R-D426-C11-F.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
No. of poles: 20.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Common terminal provided.
Use for either PLC Input Unit or Output,
Unit merely by changing short bar. Type: open type.
Structure: bottom mounting type.
Capacity: 100W.
Output voltage: 5V OMRON XS5R-D426-C11-F.
Output current: 20A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device XS5R-D426-C11-F
Built in support for determining the abnormal causes of the new under voltage detection function.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products OMRON XS5R-D426-C11-F.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer OMRON XS5R-D426-C11-F. )
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
Type: S8JC-Z series models list.
Meet the criteria: No.
Configuration: power supply with cover; DIN guide rail mounting OMRON Round Water-resistant Connectors.
Input voltage: 50W.
Output voltage: 5VDC.
Output current: 10.0A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market OMRON Round Water-resistant Connectors.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time. Servo trunk unit.
Product Name: servo relay unit OMRON Round Water-resistant Connectors.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and controol signal of position control unit,
Simple wiring on terminal stage XS5R-D426-C11-F.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON XS5R-D426-C11-F.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
...More relevant models >>>>