LK Automation Limited
XS2F-G422-J80-F Single side socket connector OMRON XS2F-G422-J80-F
Brand:
OMRON
Name: Single side socket connector
Model: XS2F-G422-J80-F
Cable core number: 4.
Cable outlet direction: L type.
Cable length: 10m.
Save time, save maintenance cost,
With a waterproof connector environment and strong tolerance of FA.
For IP67, the FA 94V-0 connector small special flammability.
The wiring system makes the device more maintainable connector,
And reduce the downtime of equipment.
Introduction of connector and modular connector with cable.
A modular connector crimping type, welding type, screw connection type 3.
With the cable connector is obtained UL certification of products.
According to IEC61076-2-101 (IEC60947-5-2), NECA4202.
...More relevant models >>>>
Name: Single side socket connector
Model: XS2F-G422-J80-F
Cable core number: 4.
Cable outlet direction: L type.
Cable length: 10m.
Save time, save maintenance cost,
With a waterproof connector environment and strong tolerance of FA.
For IP67, the FA 94V-0 connector small special flammability.
The wiring system makes the device more maintainable connector,
And reduce the downtime of equipment.
Introduction of connector and modular connector with cable.
A modular connector crimping type, welding type, screw connection type 3.
With the cable connector is obtained UL certification of products.
According to IEC61076-2-101 (IEC60947-5-2), NECA4202.
Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110 VDC.
Overcurrent detection: Instantaneous type, W/start-up lock.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available OMRON XS2F-G422-J80-F.
Instantaneous type under current sensor available XS2F-G422-J80-F
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm). Model: PY (back-mounting), page 15, Solder terminals.
Number of pins: 11 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON XS2F-G422-J80-F.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Power rating: 100 W.
Input voltage: 100 to 120 VAC, 200 to 240 VAC (allowable range: 85 to 132 VAC,
176 to 264 VAC, or 248 to 373 VDC(Select with the switch.).
Output voltage: 36 V VDC.
Output current: 2.8 A.
Built-in fan: None.
Model with terminal block facing upward.
High Reliability at a Reasonable Cost OMRON XS2F-G422-J80-F.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage OMRON Single side socket connector.
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life. A reliable 3-year warranty OMRON Single side socket connector.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately) OMRON Single side socket connector.
Refer to Period and Terms of W. No. of cable cores: 4.
Item: Standard cable.
Cable connection direction: Straight.
Cable length L: 5 m.
Smmall Round Water-resistive XS2F-G422-J80-F.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch OMRON XS2F-G422-J80-F.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
Control voltage: 100/110 VDC.
Overcurrent detection: Instantaneous type, W/start-up lock.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available OMRON XS2F-G422-J80-F.
Instantaneous type under current sensor available XS2F-G422-J80-F
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm). Model: PY (back-mounting), page 15, Solder terminals.
Number of pins: 11 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON XS2F-G422-J80-F.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Power rating: 100 W.
Input voltage: 100 to 120 VAC, 200 to 240 VAC (allowable range: 85 to 132 VAC,
176 to 264 VAC, or 248 to 373 VDC(Select with the switch.).
Output voltage: 36 V VDC.
Output current: 2.8 A.
Built-in fan: None.
Model with terminal block facing upward.
High Reliability at a Reasonable Cost OMRON XS2F-G422-J80-F.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage OMRON Single side socket connector.
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life. A reliable 3-year warranty OMRON Single side socket connector.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately) OMRON Single side socket connector.
Refer to Period and Terms of W. No. of cable cores: 4.
Item: Standard cable.
Cable connection direction: Straight.
Cable length L: 5 m.
Smmall Round Water-resistive XS2F-G422-J80-F.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch OMRON XS2F-G422-J80-F.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
...More relevant models >>>>