LK Automation Limited
TP70-1S1 OMRON TP70-1S1 On-site Flexible Rod Switch
Brand:
OMRON
Name: On-site Flexible Rod Switch
Model: TP70-1S1
Name: On-site Flexible Rod Switch (with separable emergency stop switch).
Mounting method: Front mounting.
Easy on-site input on-the-move.
Incorporation of plastic rod actuator makes the Switch easy on hands.
One-way operation:
Equipped with stopper so that operation is only possible from one direction.
Distinctive yellow used for the body.
Three different types of mounting are available.
Models with emergency-stop switch are available to suit the application.
...More relevant models >>>>
Name: On-site Flexible Rod Switch
Model: TP70-1S1
Name: On-site Flexible Rod Switch (with separable emergency stop switch).
Mounting method: Front mounting.
Easy on-site input on-the-move.
Incorporation of plastic rod actuator makes the Switch easy on hands.
One-way operation:
Equipped with stopper so that operation is only possible from one direction.
Distinctive yellow used for the body.
Three different types of mounting are available.
Models with emergency-stop switch are available to suit the application.
Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A).
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: SPDT.
Lighting: LED; 24 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness OMRON TP70-1S1.
Three-color models (green, orange, red; chameleon lighting) TP70-1S1
included in lineup. Type: 1A contact type.
Shape: round.
Terminal shape: terminal for printed board.
Action: instantaneous.
Display mode: LED display.
Operation Department color: yellow.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut OMRON TP70-1S1.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load. Shape: rectangle.
Protection structure: IP40.
Action: alternate.
Operation Department color: green.
Column length 18mm, circular F8 series.
High brightness and with uniform light.
Round type easy opening.
Small and operation feel good. Actuator: Hinge lever.
Type: Standard.
Compact, General-purpose Horizontal OMRON TP70-1S1.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorporates a switch with a durable coil spring in a tough,
high precision case OMRON On-site Flexible Rod Switch.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series OMRON On-site Flexible Rod Switch.
Terminal protective cover can be switched to wire cable from,
either the left or right.
Sealing characteristics that meet IEC IP67 degree of protection. Actuator: Resin rod (rod diameter: 8).
Hermetic, Molded terminals, -139 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMROON On-site Flexible Rod Switch TP70-1S1.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, aand four-direction head mounting OMRON TP70-1S1.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: SPDT.
Lighting: LED; 24 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness OMRON TP70-1S1.
Three-color models (green, orange, red; chameleon lighting) TP70-1S1
included in lineup. Type: 1A contact type.
Shape: round.
Terminal shape: terminal for printed board.
Action: instantaneous.
Display mode: LED display.
Operation Department color: yellow.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut OMRON TP70-1S1.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load. Shape: rectangle.
Protection structure: IP40.
Action: alternate.
Operation Department color: green.
Column length 18mm, circular F8 series.
High brightness and with uniform light.
Round type easy opening.
Small and operation feel good. Actuator: Hinge lever.
Type: Standard.
Compact, General-purpose Horizontal OMRON TP70-1S1.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorporates a switch with a durable coil spring in a tough,
high precision case OMRON On-site Flexible Rod Switch.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series OMRON On-site Flexible Rod Switch.
Terminal protective cover can be switched to wire cable from,
either the left or right.
Sealing characteristics that meet IEC IP67 degree of protection. Actuator: Resin rod (rod diameter: 8).
Hermetic, Molded terminals, -139 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMROON On-site Flexible Rod Switch TP70-1S1.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, aand four-direction head mounting OMRON TP70-1S1.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
...More relevant models >>>>