LK Automation Limited
SAO-S7N OMRON SAO-S7N current sensors available Current Sensor
Brand:
OMRON
Name: Current Sensor
Model: SAO-S7N
Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110 VDC.
Overcurrent detection: Instantaneous type, W/o start-up lock.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available.
Instantaneous type under current sensor available.
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm).
...More relevant models >>>>
Name: Current Sensor
Model: SAO-S7N
Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110 VDC.
Overcurrent detection: Instantaneous type, W/o start-up lock.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available.
Instantaneous type under current sensor available.
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm).
Time specification: Instantaneous type.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON SAO-S7N.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase SAO-S7N
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON SAO-S7N. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Power ratings: 3 W.
Output voltage: 5 V.
Output current: 0.6 A.
Miniature DIN Rail Mounting DC-DC Power.
Supplies.
65 mm depth enables mounting onto control panels with OMRON SAO-S7N.
100 mm depth.
Inputs: 10.2 to 27.6 VDC (DC input).
7.5-W models provide both ±12-V and ±15-V outputs.
A complete lineup with 10 different models.
UL and CSA approved.
RoHS-compliant. Type: Cable with Connectors on Both Ends (RJ45/RJ45) OMRON Current Sensor.
Category: Cat.5 .
Cable sheath material: PUR.
Cable color: Green.
Cable length: 7.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks OMRON Current Sensor. SYSMAC PLC Units: CQM1-CPU21, CQM1-CPU41, CQM1-CPU42, CQM1-CPU43,
CQM1-CPU44, (Units with RS-232C port), C200HS-CPU31/33/21/23,
CV500/1000/2000-CPU01, CVM1-CPU01/11, CV500-LK201, (Communications port 2),
C200HE-CPU42, C200HG-CPU43/63, C200HX-CPU44/64, C200HW-COM02,
C200HW-COM04, C200HW-COM05, C200HW-COM06, CPM1-CIF01 OMRON Current Sensor.
Cable length L: 5 m.
Host: Personal computer: IBM PC/AT or compatible.
Ideal Cables for between Programmable Controllers and Host Computers. Shape: DIP straight terminal.
Pole number: 60.
Pole pole number: 1.
Minimum packing unit: 30.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XXG5) - specific plug (XG8) and PCB type SAO-S7N.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON SAO-S7N.
MIL specification (MIL-C-83503) standard.
Standard product conforms to the UL specification (No. E103202 File) certified products.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON SAO-S7N.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase SAO-S7N
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON SAO-S7N. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Power ratings: 3 W.
Output voltage: 5 V.
Output current: 0.6 A.
Miniature DIN Rail Mounting DC-DC Power.
Supplies.
65 mm depth enables mounting onto control panels with OMRON SAO-S7N.
100 mm depth.
Inputs: 10.2 to 27.6 VDC (DC input).
7.5-W models provide both ±12-V and ±15-V outputs.
A complete lineup with 10 different models.
UL and CSA approved.
RoHS-compliant. Type: Cable with Connectors on Both Ends (RJ45/RJ45) OMRON Current Sensor.
Category: Cat.5 .
Cable sheath material: PUR.
Cable color: Green.
Cable length: 7.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks OMRON Current Sensor. SYSMAC PLC Units: CQM1-CPU21, CQM1-CPU41, CQM1-CPU42, CQM1-CPU43,
CQM1-CPU44, (Units with RS-232C port), C200HS-CPU31/33/21/23,
CV500/1000/2000-CPU01, CVM1-CPU01/11, CV500-LK201, (Communications port 2),
C200HE-CPU42, C200HG-CPU43/63, C200HX-CPU44/64, C200HW-COM02,
C200HW-COM04, C200HW-COM05, C200HW-COM06, CPM1-CIF01 OMRON Current Sensor.
Cable length L: 5 m.
Host: Personal computer: IBM PC/AT or compatible.
Ideal Cables for between Programmable Controllers and Host Computers. Shape: DIP straight terminal.
Pole number: 60.
Pole pole number: 1.
Minimum packing unit: 30.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XXG5) - specific plug (XG8) and PCB type SAO-S7N.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON SAO-S7N.
MIL specification (MIL-C-83503) standard.
Standard product conforms to the UL specification (No. E103202 File) certified products.
...More relevant models >>>>