LK Automation Limited
RX40NC6H Main base plate MITSUBISHI RX40NC6H The input module is the most used module in the control system
Brand:
MITSUBISHI
Name: High speed input module
Model: RX40NC6H
Input points: 16 points.
Rated input voltage and frequency: DC24V.
Rated input current: 6.0mA.
Response time: 5 S ~ 70ms.
Common way: 8 point / public end (negative public end).
Interrupt function: have.
External wiring connection mode: 18 point screw terminal.
The input module is the most used module in the control system.
According to the input voltage, the input points of different, choose the most suitable user needs of the module.
1 modules are equipped with a variety of functions.
Can be through a single input module to 1 points for the unit to set the high speed response, interrupt input function.
In addition, the public end of the module can be freely selected as the common end of the positive pole and the negative pole.
It is not necessary to use different modules according to the input specifications and functions, and reduce the number of modules,
Therefore slot occupied quantity can be reduced by 20% than in the past, the deployment cost can be reduced by 60% compared with the previous.
...More relevant models >>>>
Name: High speed input module
Model: RX40NC6H
Input points: 16 points.
Rated input voltage and frequency: DC24V.
Rated input current: 6.0mA.
Response time: 5 S ~ 70ms.
Common way: 8 point / public end (negative public end).
Interrupt function: have.
External wiring connection mode: 18 point screw terminal.
The input module is the most used module in the control system.
According to the input voltage, the input points of different, choose the most suitable user needs of the module.
1 modules are equipped with a variety of functions.
Can be through a single input module to 1 points for the unit to set the high speed response, interrupt input function.
In addition, the public end of the module can be freely selected as the common end of the positive pole and the negative pole.
It is not necessary to use different modules according to the input specifications and functions, and reduce the number of modules,
Therefore slot occupied quantity can be reduced by 20% than in the past, the deployment cost can be reduced by 60% compared with the previous.
Analog output channel number: 8CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24 MITSUBISHI RX40NC6H.
External wiring connection mode: 18 point screw terminal RX40NC6H
Voltage output
Digital input value: 32000 ~ 32000.
Analog output voltage: DC - 10 - 10V.
Current output
Digital input value: -.
Analog output current: -.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle MITSUBISHI RX40NC6H.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line control, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time MITSUBISHI RX40NC6H.
The analog output module is the interface of analog signal to the external output through the programmable controller MITSUBISHI Main base plate.
Can choose voltage output, current output, voltage / current mixed output type for a variety of purposes of the module. "Axis of control: 16.
Program language: motion SFC, special instruction MITSUBISHI Main base plate.
Servo program capacity: 32K.
Location points: 6400 (indirect).
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control MITSUBISHI Main base plate.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized.
High speed data communication between CPU modules.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between thee CPU module and the 0 RX40NC6H. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU moodules and the real-time response of the refresh data MITSUBISHI RX40NC6H.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program. "
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24 MITSUBISHI RX40NC6H.
External wiring connection mode: 18 point screw terminal RX40NC6H
Voltage output
Digital input value: 32000 ~ 32000.
Analog output voltage: DC - 10 - 10V.
Current output
Digital input value: -.
Analog output current: -.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle MITSUBISHI RX40NC6H.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line control, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time MITSUBISHI RX40NC6H.
The analog output module is the interface of analog signal to the external output through the programmable controller MITSUBISHI Main base plate.
Can choose voltage output, current output, voltage / current mixed output type for a variety of purposes of the module. "Axis of control: 16.
Program language: motion SFC, special instruction MITSUBISHI Main base plate.
Servo program capacity: 32K.
Location points: 6400 (indirect).
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control MITSUBISHI Main base plate.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized.
High speed data communication between CPU modules.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between thee CPU module and the 0 RX40NC6H. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU moodules and the real-time response of the refresh data MITSUBISHI RX40NC6H.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program. "
...More relevant models >>>>