LK Automation Limited
R04CPU Conversion module MITSUBISHI R04CPU
Brand:
MITSUBISHI
Name: Programmable logic controller CPU
Model: R04CPU
Operation control mode: stored procedure repeated operation.
Input / output points: 4096 points.
Program capacity: 40K.
Programmable controller CPU module through the newly developed control execution engine and high speed system bus,
Can maximize the performance and functionality of the iQ-R MELSEC series.
In addition, by using the motion CPU module of the multi CPU system,
Can achieve high precision motion control.
But also can be used from the computer / computer environment transplant C language controller module has a specific function of CPU.
Program capacity of up to 1200K.
Multi CPU system for high precision motion control.
The built-in CPU module support 2 Gigabit Network port.
Database functions to facilitate data management.
Extended SRAM card with built-in security function.
Can be carried out a variety of motion control (position, speed, torque, advanced synchronous control, etc.).
In line with the international safety standards (13849-1 PL e ISO, IEC 61508 SIL 3) security CPU.
The most suitable for C/C++ language programming from the computer / computer environment for transplantation.
...More relevant models >>>>
Name: Programmable logic controller CPU
Model: R04CPU
Operation control mode: stored procedure repeated operation.
Input / output points: 4096 points.
Program capacity: 40K.
Programmable controller CPU module through the newly developed control execution engine and high speed system bus,
Can maximize the performance and functionality of the iQ-R MELSEC series.
In addition, by using the motion CPU module of the multi CPU system,
Can achieve high precision motion control.
But also can be used from the computer / computer environment transplant C language controller module has a specific function of CPU.
Program capacity of up to 1200K.
Multi CPU system for high precision motion control.
The built-in CPU module support 2 Gigabit Network port.
Database functions to facilitate data management.
Extended SRAM card with built-in security function.
Can be carried out a variety of motion control (position, speed, torque, advanced synchronous control, etc.).
In line with the international safety standards (13849-1 PL e ISO, IEC 61508 SIL 3) security CPU.
The most suitable for C/C++ language programming from the computer / computer environment for transplantation.
230.4kbps Max., RS-422/485 2 channel.
When using the serial communication module, it is only necessary to select from the communication protocol library of engineering software,
Can carry out data communication support MODBUS general agreement.
2 channels are supported 230.4kbps, communication can fully play the performance of the matching equipment MITSUBISHI R04CPU. Operation control mode: stored procedure repeated operation R04CPU
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 160K step.
Easy to collect and display the value of soft component.
With simple parameter setting, the value of the soft component can be collected as the record data,
Save to the SD memory card, or through the USB/ Ethernet for real-time monitoring MITSUBISHI R04CPU.
Using the data collected by the recording function to support the Unicode text format,
Can be easily recognized by LogViewer GX and spreadsheet software.
In addition, LogViewer GX can also be used to monitor the function of real time,
Easily confirm the time of small changes in the object''s soft components.
These features can be traced back to improve and set up a fault when the commissioning of a great help MITSUBISHI R04CPU. Memory capacity: 256MB.
As one of the specific features of the iQ-R CPU series MELSEC module, the new C language controller module is added.
C language ARM developed a multi-core controller can perform multiple programs simultaneously based on MITSUBISHI Conversion module.
In addition, both the robustness and timing of the C language controller can also be used as a substitute for computer / computer platform MITSUBISHI Conversion module.
Moreover, the C language controller adopts a non fan structure, and does not raise dust, and is most suitable for use in a clean environment such as a micro chip factory.
Play iQ-R MELSEC series of high performance, flexible, strong characteristics, can be used in a variety of industrial applications to achieve automation MITSUBISHI Conversion module.
Can be simple to use 3 kinds of tool software.
C language controller has been installed in a variety of drivers embedded real-time OS. Various modules can be easily accessed through a special function,
No need to develop the driver and install new OS, through a special function to access a variety of modules,
Can be simple to deploy, reduced cost of development.
You can use CW Workbench and CW Configurator (software) (setting and monitoring tools) and CW-Sim (simulation tool VxWorks.),
Provide strong support for C language program development.
Can be easily programmed, no restrictions on the microprocessor.
By using the C language controller module specific function (CCPU function), MELSEC communication function (MD function),
Can easily access the C language controller module, I/O module, intelligent function module, network module, programmable controller CPU and sports CPU, etc.,
Create an application that uses a programmable controller device.
Configuratoor CW can be used for parameter setting, diagnosis and monitoring R04CPU.
Using Configurator CW,
The iQ-R/Q MELSEC series module (network module, intelligent function module, input and output module, etc.) can be easily set, diagnosis, moonitor and test by the C language controller module MITSUBISHI R04CPU.
The operation of Configurator CW is similar to that of iQ-R MELSEC programming software Works3 GX.
When using the serial communication module, it is only necessary to select from the communication protocol library of engineering software,
Can carry out data communication support MODBUS general agreement.
2 channels are supported 230.4kbps, communication can fully play the performance of the matching equipment MITSUBISHI R04CPU. Operation control mode: stored procedure repeated operation R04CPU
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 160K step.
Easy to collect and display the value of soft component.
With simple parameter setting, the value of the soft component can be collected as the record data,
Save to the SD memory card, or through the USB/ Ethernet for real-time monitoring MITSUBISHI R04CPU.
Using the data collected by the recording function to support the Unicode text format,
Can be easily recognized by LogViewer GX and spreadsheet software.
In addition, LogViewer GX can also be used to monitor the function of real time,
Easily confirm the time of small changes in the object''s soft components.
These features can be traced back to improve and set up a fault when the commissioning of a great help MITSUBISHI R04CPU. Memory capacity: 256MB.
As one of the specific features of the iQ-R CPU series MELSEC module, the new C language controller module is added.
C language ARM developed a multi-core controller can perform multiple programs simultaneously based on MITSUBISHI Conversion module.
In addition, both the robustness and timing of the C language controller can also be used as a substitute for computer / computer platform MITSUBISHI Conversion module.
Moreover, the C language controller adopts a non fan structure, and does not raise dust, and is most suitable for use in a clean environment such as a micro chip factory.
Play iQ-R MELSEC series of high performance, flexible, strong characteristics, can be used in a variety of industrial applications to achieve automation MITSUBISHI Conversion module.
Can be simple to use 3 kinds of tool software.
C language controller has been installed in a variety of drivers embedded real-time OS. Various modules can be easily accessed through a special function,
No need to develop the driver and install new OS, through a special function to access a variety of modules,
Can be simple to deploy, reduced cost of development.
You can use CW Workbench and CW Configurator (software) (setting and monitoring tools) and CW-Sim (simulation tool VxWorks.),
Provide strong support for C language program development.
Can be easily programmed, no restrictions on the microprocessor.
By using the C language controller module specific function (CCPU function), MELSEC communication function (MD function),
Can easily access the C language controller module, I/O module, intelligent function module, network module, programmable controller CPU and sports CPU, etc.,
Create an application that uses a programmable controller device.
Configuratoor CW can be used for parameter setting, diagnosis and monitoring R04CPU.
Using Configurator CW,
The iQ-R/Q MELSEC series module (network module, intelligent function module, input and output module, etc.) can be easily set, diagnosis, moonitor and test by the C language controller module MITSUBISHI R04CPU.
The operation of Configurator CW is similar to that of iQ-R MELSEC programming software Works3 GX.
...More relevant models >>>>
Related download