The main controller is connected to the man-machine interface of the host, for MPI communicationTouch screen anti ultraviolet protective film (1 pieces).Used to display analog RGB (2 channels) on the GP3000Adapter for EX module (5 / set)10.4 inches or larger, when installed to provide the function of dust and moisture7 Proface PFXZGMCNDC1. 4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)For 5 PFXZGMCNDC17 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.GP3000H portable sling12 way 2 digital signals into analog signals and output results10.4 inches (STN), the replacement of the host backlight (2 / set).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface PFXZGMCNDC1. A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Connect to PC, transfer screen data and user programs.12.1 inch screen protective cover (1 pieces)7 Proface PFXZGMCNDC1. 5 inches, GP installed to the hard panel to provide dust and moisture proof function.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface DC power adapter. 12.1 inches, replace the backlight (1 / set)COM2 terminal adapter for communication through the RS-422/485 connectionApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface DC power adapter. Suitable for LT4000M/GP4000M series modules, 5.7 inch. 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)NETWORK FLEX 64 point DIO connector terminal bloock, (including 2)For 3 Proface DC power adapter PFXZGMCNDC1. 8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Cable for connecting GP3000 to various modulesStandard cable for connectinng GP3000H adapter and GP3000H Proface PFXZGMCNDC1.
Length: 3 meters. To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)