For multi connection communication, length: 5 meters.7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface PFXZCBCNDC1.
Length of 10 meters. Some types of PLC are not connected PFXZCBCNDC1 Length: 5 meters.Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Suitable for A/B+ Type modelsConnector for connecting DC power cord (5)Apply to GLC-2600/2500For RGB input USB cable to prevent disconnection (2 / set)B/B+/C FLEX NETWORK Type connector (5)CFast cards (32GB, SLC,) inserted in the CFast slot for storage Proface PFXZCBCNDC1. Slave station module for connecting support for CANopen10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters Proface PFXZCBCNDC1. Converting 2 analog signals into digital signalsDigital small keyboard with USB interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Used to connect the 2-Port adapter to GP4000A veneer, for the GP4000 series back loading models of full flush (white, 1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface DC power adapter Proface DC power adapter Proface DC power adapter. (1)For connecting the GPP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block PFXZCBCNDC1. For the DVI input to GP3000For the direct connectionn of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface PFXZCBCNDC1. 15 inches, replaced by a host of backlight (1).