Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface GP3000-MPI21-PFE. 10.4 inches (TFT), replace the backlight (2 / set)Fitting on NETWORK FLEX interface GP3000-MPI21-PFE Connecting NETWORK FLEX communication cable. (5 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface GP3000-MPI21-PFE. 15 inches, GP installed to the hard panel to provide dust and moisture proof function.4.3 Inch Touch Screen anti UV protective film (1 pieces).5.7 inch screen protective cover (1 pieces)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).10.4 inches and above, used to connect the power cord (5 / set) Proface GP3000-MPI21-PFE. LT4000M (module type DIO), NPN output, DC24V (host).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Suitable for LT4000M/GP4000M series modules, 5 Proface MPI cable (3.5 m). 7 inch. For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)5 / setsThe three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface MPI cable (3.5 m). 12 way 4 digital signals into analog signals and output resultsThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface MPI cable (3.5 m). 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).When the man-machine interface is installed to the fixed panel for pproviding dust proof and moisture proof function (1 pieces) GP3000-MPI21-PFE. 2 / setsLT4000M (module type DIO), PNP output, DC24V (host).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel modelss Proface GP3000-MPI21-PFE. (2 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters.