Data transmission cable between host and LT series. Length: 5 meters.OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.A veneer, for the GP4000 series back loading models of full flush (white, 1)Used to install the GP3000H series to a commercially available support arm or panel Proface CA3-CBLMLT-01 CA3-CBLMLT-01 Touch screen anti ultraviolet protective film (1 pieces).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Portable GP2000H series models accessories, RS-422 single head cable (10 m) Proface CA3-CBLMLT-01. 7.0/7.5 inch screen protective cover (1 pieces)Disposable battery (1 blocks) for backing up clock data.12.1 inches, replace the backlight (1 / set)Length: 5 meters.COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface CA3-CBLMLT-01. USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface Multi-Link connecting cable (5 m). Up to 7 EX modules can be connected.For 3.8 inch models, connect the connector to the DIO interface Proface Multi-Link connecting cable (5 m). For connecting external I/O devices. (5 / set)GP2500S useTouch screen anti ultraviolet protective film (1 pieces).15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different Proface Multi-Link connecting cable (5 m). Engineering documents created by the LT interface to download images and logic programming software throuugh the USB interface CA3-CBLMLT-01. Apply to GLC-2600/2500Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. When the man-machine interface is installed to the fixed panel to pprovide dust proof and moisture proof function Proface CA3-CBLMLT-01. (1)Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).