LK Automation Limited
PSM-CONV00 Bus converter Proface PSM-CONV00
Brand:
Proface
Name: Bus converter
Model: PSM-CONV00
The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.
...More relevant models >>>>
Name: Bus converter
Model: PSM-CONV00
The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.
7.0/7.5 inch screen protective cover (1 pieces)Used to connect the 2-Port adapter to GP4000Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointFor RGB input USB cable to prevent disconnection (2 / set)5 / setsA veneer, for the GP4000 series back loading models of full flush (white, 1)Data transmission cable between host and LT series Proface PSM-CONV00 PSM-CONV00 Length: 5 meters.Connector for connecting DC power cord (5)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface PSM-CONV00. Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Converting 2 analog signals into digital signalsI/O module, including 32 point NPN/PNP inputThe main controller is connected to the man-machine interface for MPI communicationFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface PSM-CONV00. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface Bus converter.
Length: 10 meters. Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) Proface Bus converter. 2 / setsFor the DVI input to GP3000COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).LT4000M (module type analog), NPN output, DC24V (host).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface Bus converter. (1)Dispossable film (5 sheets / sets) for protecting screen against contamination of human computer interface PSM-CONV00. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certiffication (5 / set) Proface PSM-CONV00. 10.4 inches and above, used to connect the power cord (5 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).
Length: 10 meters. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointFor RGB input USB cable to prevent disconnection (2 / set)5 / setsA veneer, for the GP4000 series back loading models of full flush (white, 1)Data transmission cable between host and LT series Proface PSM-CONV00 PSM-CONV00 Length: 5 meters.Connector for connecting DC power cord (5)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface PSM-CONV00. Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Converting 2 analog signals into digital signalsI/O module, including 32 point NPN/PNP inputThe main controller is connected to the man-machine interface for MPI communicationFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface PSM-CONV00. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface Bus converter.
Length: 10 meters. Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) Proface Bus converter. 2 / setsFor the DVI input to GP3000COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).LT4000M (module type analog), NPN output, DC24V (host).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface Bus converter. (1)Dispossable film (5 sheets / sets) for protecting screen against contamination of human computer interface PSM-CONV00. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certiffication (5 / set) Proface PSM-CONV00. 10.4 inches and above, used to connect the power cord (5 / set).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).
...More relevant models >>>>