3 / setsOne end is a loose wire, which is used to carry out RS-485 connection between the host and LT.Converting 2 analog signals into digital signalsCOM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface PS400-WP00-MS PS400-WP00-MS 12.1 inches, replace the backlight (1 / set)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Touch screen anti ultraviolet protective film (1 pieces).Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).A1/A2/B+ DIO Type connector (welding type) (5 / set)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface PS400-WP00-MS. The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. A veneer, for the GP4000 series back loading models of full flush (white, 1)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface PS400-WP00-MS. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface Waterproof rubber gasket. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface Waterproof rubber gasket Proface Waterproof rubber gasket PS400-WP00-MS. 7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceGP2500S use7 Proface PS400-WP00-MS. 0/7.5 inch screen protective cover (1 pieces)NETWORK FLEX 64 point DIO connector terminal block, (including 2)