Touch screen anti ultraviolet protective film (1 pieces).Cable for connecting GP3000 to various modulesCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor the DVI input to GP3000COM1 interface with the cable for direct connection to the CPU series PLC QA veneer, for the GP4000 series back loading models of full flush (white, 1)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals Proface PFXZXMADSM51 PFXZXMADSM51 COM2 terminal adapter for communication through the RS-422/485 connectionFor 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PFXZXMADSM51. (1)5.7 inches, replace the backlight (1 / set)Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface PFXZXMADSM51. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Connector for connecting DC power cord. (right angle, 5 / set)Length: 5 meters.Suitable for LT4000M/GP4000M series modules, 3.5 inch.The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface Display module / host module split installation cable (5 m) Proface Display module / host module split installation cable (5 m). For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Used for surface protection of man-machine interface from oil and chemical polluttion (5 / set) Proface Display module / host module split installation cable (5 m) PFXZXMADSM51. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.For the elastic display module installation nut wrench (1 / set) Proface PFXZXMADSM51. Converting 2 analog signals into digital signals10.4 inches or larger, when installed to provide the function of dust and moisture