Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).For the man-machine interface hanging in the neck lanyard.5.7 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Colorful LED switch with USB interface Proface PFXZCFAF1 PFXZCFAF1 The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.The nut for mounting the display module (10 / set) Proface PFXZCFAF1. 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B).Backup battery for time and data backup (1).COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Touch screen anti ultraviolet protective film (1 pieces) Proface PFXZCFAF1. Adapter for EX module (5 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockTouch screen anti ultraviolet protective film (1 pieces) Proface Mounting screw. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface Mounting screw. Apply to GLC-2600/250010.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Suitable for LT4000M/GP4000M series modules, 5 Proface Mounting screw. 7 inch. NETWORK FLEX 64 point DIO conneector terminal block, (including 2)Memory for extending EX GP-Pro alarm and character table functions PFXZCFAF1. Used to convert RGB to DVI-A10.4 inches (STN), the replacement of the host backlight (2 / set).Touch screen anti ultraviolet prottective film (1 pieces) Proface PFXZCFAF1. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.