Connector for connecting DC power cord (5 / set).For the DVI input to GP3000Use external output for the GP3000 series of auxiliary connectors (5 / sets).10.4 inches (TFT), the replacement of the host backlight (1).The PC adapter for PCMCIA slot read CF card required.Used to prevent accidental operation Proface PFXZCETWHA1. Includes 3 mounting screws.Apply to GLC-2600/2500Used to display analog RGB (2 channels) on the GP3000For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters PFXZCETWHA1Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)The module is used for mounting on the back board of the GLC2000 series host computer Proface PFXZCETWHA1. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).3.4 Inch Touch Screen anti UV protective film (1 pieces) Proface PFXZCETWHA1. 7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters Proface EZ series lamp (with base). The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface EZ series lamp (with base). 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).A veneer, for the GP4000 series back loading models of full flush (white, 1)For RGB input USB cable to prevent ddisconnection (2 / set)Length: 3 metersDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface EZ series lamp (with base) PFXZCETWHA1. Used for converting the D-Sub 9 pin convex jointt to the D-Sub 25 pin concave jointWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PFXZCETWHA1. (1)