Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointConnector for connecting a serial port (1)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface PFXZCBWG61. A veneer, for the GP4000 series back loading models of full flush (white, 1)I/O module, including 32 point NPN/PNP inputAdapter for EX module (5 / set)Length: 5 meters PFXZCBWG61Touch screen anti ultraviolet protective film (1 pieces).CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Backup battery for time and data backup (1).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface5 Proface PFXZCBWG61. 7 inch screen protective cover (1 pieces)A veneer, for the GP4000 series back loading models of full flush (white, 1)5.7 inches, replace the backlight (1 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface PFXZCBWG61. Extended cable for connecting USB (Type-A) (LT) interface.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Data transmission cable between host and LT series. Length: 5 meters.5.7 inches, GP installed to the hard panel to provide dust and moisture proof function Proface 5.7 inch model waterproof rubber gasket. The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface 5.7 inch model waterproof rubber gasket. Used to install the man-machine interface to the fixed panel. (4 / set)Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors Proface 5.7 inch model waterproof rubber gasket.
Length: 10 meters. AUX conneector for external output (5 / set) PFXZCBWG61. Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output