Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.1-0 DVI standard (DVI-D 24 pin convex connector)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelLength: 3 meters256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface PFXLM4B01DAK PFXLM4B01DAK For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface PFXLM4B01DAK. Digital small keyboard with USB interface.For 5.7 inch models, for fixing the hooks of the three EX modules.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface PFXLM4B01DAK. Touch screen anti ultraviolet protective film (1 pieces).5 / setsOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface LT4000M (module type simulation). 7 Proface LT4000M (module type simulation). 4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeTouch screen anti ultraviolet protective film (1 pieces).Clock battery, save system date and time when power is off.Extension cable for connecting USB (Mini-B) interface to front panel.7.0/7 Proface LT4000M (module type simulation). 5 inch screen protective cover (1 pieces)Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C PFXLM4B01DAK. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accesssories Proface PFXLM4B01DAK. 2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.