LK Automation Limited
OMRON WLCA2-LD-M1GJ-N Two-circuit Limit Switch/Long-life Two-circuit Limit Switch OMRON WLCA2-LD-M1GJ-N
Brand:
OMRON
Name: Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Model: WLCA2-LD-M1GJ-N
Actuator: Roller lever: R38.
Item: Basic.
Connector shape: Threaded (M12).
Built-in switch type: General-purpose.
Voltage: DC.
Wiring locations: NO only 2 core.
Connector pin No: NO 1 4 .
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
...More relevant models >>>>
Name: Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Model: WLCA2-LD-M1GJ-N
Actuator: Roller lever: R38.
Item: Basic.
Connector shape: Threaded (M12).
Built-in switch type: General-purpose.
Voltage: DC.
Wiring locations: NO only 2 core.
Connector pin No: NO 1 4 .
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
Ratings: 1 A at 30 VDC.
LED indicator: Without indicator.
Actuator: Center roller lever.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement OMRON WLCA2-LD-M1GJ-N.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) WLCA2-LD-M1GJ-N
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Appearance: Round/Projection type LED voltage-reduction lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC OMRON WLCA2-LD-M1GJ-N.
Lighting: LED.
Operating voltage: 100 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature OMRON WLCA2-LD-M1GJ-N.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Classification: Momentary operation.
Shape of Operation Unit: 13 dia.
Output: 1 *1.
Operation Unit color: Blue (-A) OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Built-in V-series Miniature Basic.
Switch for Compatibility with OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Business and Consumer Equipment.
Momentary operation and lock.
Operation Unit available in six colors.
Improved sense of touch with built-in miniature basic switch. Application: General applications for purified water,
For 4-pole electrode.
Separate Electrode Holders for Water OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Supply and Drainage Control in Buildings.
Small, Lightweight Electrode Holdeers for,
Use as Built-in Components WLCA2-LD-M1GJ-N.
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp water in buildings OMRON WLCA2-LD-M1GJ-N.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
LED indicator: Without indicator.
Actuator: Center roller lever.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement OMRON WLCA2-LD-M1GJ-N.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) WLCA2-LD-M1GJ-N
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Appearance: Round/Projection type LED voltage-reduction lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC OMRON WLCA2-LD-M1GJ-N.
Lighting: LED.
Operating voltage: 100 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature OMRON WLCA2-LD-M1GJ-N.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Classification: Momentary operation.
Shape of Operation Unit: 13 dia.
Output: 1 *1.
Operation Unit color: Blue (-A) OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Built-in V-series Miniature Basic.
Switch for Compatibility with OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Business and Consumer Equipment.
Momentary operation and lock.
Operation Unit available in six colors.
Improved sense of touch with built-in miniature basic switch. Application: General applications for purified water,
For 4-pole electrode.
Separate Electrode Holders for Water OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch.
Supply and Drainage Control in Buildings.
Small, Lightweight Electrode Holdeers for,
Use as Built-in Components WLCA2-LD-M1GJ-N.
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp water in buildings OMRON WLCA2-LD-M1GJ-N.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
...More relevant models >>>>