LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
OMRON G2RV-1-S-G DC48 Slim I/O Relay OMRON G2RV-1-S-G DC48
Brand: OMRON
Name: Slim I/O Relay
Model: G2RV-1-S-G DC48
Type: Standard.
Latching lever (Test switch): NO.
Rated input voltage: DC, 48.
Applicable model: G2RV-SR700/500 AC/DC48V, G2RV-SR700/500 AC100V,
G2RV-SR700/500 AC110V, G2RV-SR700/500 AC200V, G2RV-SR700/500 AC230V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.

Input terminals: Screwless clamp terminals (detachable).
Isolation method: Phototriaccoupler.
Zero cross function: Yes.
Operation indicator: Yes.
Alarm output: 2 outputs (Heater Burnout Detection,
SSR Short-circuit Failure Detection).
Applicable load (See note.): 2 to 25 A, 100 to 240 VAC.
A New-concept SSR with Built-in OMRON G2RV-1-S-G DC48.
Current Transformer.
Heater Burnout and SSR Short G2RV-1-S-G DC48
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a group of heaters.
Detects the burnout of 3-phase heaters.
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws OMRON G2RV-1-S-G DC48.
Three types of input terminals available: M3 terminals,
screwless clamp terminals (detachable), or compact slotted,
screw terminals (detachable).
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified. Type: Standard.
Contact form: DPDT.
Cased: Plug-in (octal pins) terminals.
Mechanically Latching Relays Based on the.
MM Power Relay.
Low power consumption due to mechanical latch for economic operation OMRON G2RV-1-S-G DC48.
Relays with mixed coil specifications can be produced,
(e.g., AC setcoil and DC reset coil).
Operational response fast enough to enable pulse signal power applications OMRON Slim I/O Relay.
Ambient operating temperature: –10°C to 55°C. Classification: Standard models.
Rated voltage: Standard products, 24, 100/110, 200/220, or 220/240 VAC,
12, 24, or 100/110 VDC; Made-to-order items, 12, or 110/120 VAC, 48 VDC OMRON Slim I/O Relay.
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment.
VDE certification (Germany).
Different colors of coil tape for AC and,
DC models to more easily distinguish them OMRON Slim I/O Relay.
MY(S) models with latching levers added for,
easier circuit checking. Compact Terminal Relay with 4 Independent.
Outputs.
Equipped with four G6B Mini-relays that are compact, highly sen,
sitive, and highly resistant to dielectric surges, and that can switch,
5 amps of power.
Sealed plastic construction used for relays G2RV-1-S-G DC48.
Easy wiring with separated input/output terminals.
Special P6B Mounting Socket used to facilitate maintenance,
(except for high-reliability models).
UL and CSA certification for standard models,
(except for high-reliability models) OMRON G2RV-1-S-G DC48.
VDE certification for G6B-4BND/47BND/48BND for 12/24 VDC.
DIN Track mounting, and screw mounting models are available.


...More relevant models >>>>
Last one: G2RV-1-S-G DC21
next one: G2RV-1-SI-G DC21