LK Automation Limited
OMRON E32-DC200E Optical fiber sensor OMRON E32-DC200E
Brand:
OMRON
Name: Optical fiber sensor
Model: E32-DC200E
E32-DC200E type: standard type; standard,
Specialty: M3 screws (small),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
...More relevant models >>>>
Name: Optical fiber sensor
Model: E32-DC200E
E32-DC200E type: standard type; standard,
Specialty: M3 screws (small),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 2.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 14 OMRON E32-DC200E. Absolute diameter 65.
High resolution absolute type for detecting instrument and precision positioning E32-DC200E
To achieve a resolution of 12 bits (maximum 4096) of high resolution.
Response frequency is the high speed response of 40kHz
Output with gray code and BCD code.
The shape is smaller than the old one.
Power supply voltage: DC5 ~ 24V.
Output form: Gray 2.
Output code: open collector output OMRON E32-DC200E. Size: M12 (brass), single distance, non shield type.
Detection range: 5mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E32-DC200E.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site OMRON Optical fiber sensor.
Simulation test was carried out in the environment of high oil mist concentration OMRON Optical fiber sensor. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NC.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON Optical fiber sensor. Appearance: Unshielded.
Sensing distance: 3 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum diee-cast models also available E32-DC200E. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor OMRON E32-DC200E.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
Count: 1 .
Accessories: Description, Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 2.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 14 OMRON E32-DC200E. Absolute diameter 65.
High resolution absolute type for detecting instrument and precision positioning E32-DC200E
To achieve a resolution of 12 bits (maximum 4096) of high resolution.
Response frequency is the high speed response of 40kHz
Output with gray code and BCD code.
The shape is smaller than the old one.
Power supply voltage: DC5 ~ 24V.
Output form: Gray 2.
Output code: open collector output OMRON E32-DC200E. Size: M12 (brass), single distance, non shield type.
Detection range: 5mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E32-DC200E.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site OMRON Optical fiber sensor.
Simulation test was carried out in the environment of high oil mist concentration OMRON Optical fiber sensor. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NC.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON Optical fiber sensor. Appearance: Unshielded.
Sensing distance: 3 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum diee-cast models also available E32-DC200E. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor OMRON E32-DC200E.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
...More relevant models >>>>