LK Automation Limited
OMRON E32-A04 Specialty: ultra thin type (t=2mm) opening angle 3 degree adjustment optical axis after the factory, OMRON E32-A04
Brand:
OMRON
Name: Optical fiber sensor
Model: E32-A04
E32-A04 type: special beam type; wafer mapping,
Specialty: ultra thin type (t=2mm); opening angle 3 degree adjustment optical axis after the factory,
Bending radius (mm): R10.
Fiber element for meeting diversified needs
...More relevant models >>>>
Name: Optical fiber sensor
Model: E32-A04
E32-A04 type: special beam type; wafer mapping,
Specialty: ultra thin type (t=2mm); opening angle 3 degree adjustment optical axis after the factory,
Bending radius (mm): R10.
Fiber element for meeting diversified needs
Sensing method: Diffuse-reflective Sensors.
Appearance: Vertical.
Connection method: Connector (M12).
Sensing distance: 700 mm .
Functions: --.
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Field of view: Wide View (Short-distance).
Number of pixels: 760,000 pixels OMRON E32-A04.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 8 on p E32-A0420.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series OMRON E32-A04. Visible light rays.
Visually identify the location of the detection point.
Set up and maintenance is very convenientType: Narrow View/Single Function.
NPN.
Low-cost but advanced Smart.
Sensors combining benefits of.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching OMRON E32-A04.
LCD monitor.
Ultra-high speed response for fast-moving.
production lines. Appearance: Shielded.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations OMRON Optical fiber sensor.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. E32-T24R type: standard type; soft (new standard),
Features: with 1 cylinder side (small),
Shape / detection distance (mm): 60; 50; 25 (10),
Standard test object
(minimum test object) (mm) 1: 0 OMRON Optical fiber sensor. 5 (0.005),
Fiber element for meeting diversified needsSpeed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work OMRON Optical fiber sensor E32-A04. OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Optical system: positive and negative radiiation OMRON E32-A04.
Detection distance: 40 positive and negative 2.5mm.
Beam shape: linear beam.
Beam diameter: 2000mm * 35 M.
Resolution: 0.4 M.
Cable length: 4m.
Appearance: Vertical.
Connection method: Connector (M12).
Sensing distance: 700 mm .
Functions: --.
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Field of view: Wide View (Short-distance).
Number of pixels: 760,000 pixels OMRON E32-A04.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 8 on p E32-A0420.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series OMRON E32-A04. Visible light rays.
Visually identify the location of the detection point.
Set up and maintenance is very convenientType: Narrow View/Single Function.
NPN.
Low-cost but advanced Smart.
Sensors combining benefits of.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching OMRON E32-A04.
LCD monitor.
Ultra-high speed response for fast-moving.
production lines. Appearance: Shielded.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations OMRON Optical fiber sensor.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. E32-T24R type: standard type; soft (new standard),
Features: with 1 cylinder side (small),
Shape / detection distance (mm): 60; 50; 25 (10),
Standard test object
(minimum test object) (mm) 1: 0 OMRON Optical fiber sensor. 5 (0.005),
Fiber element for meeting diversified needsSpeed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work OMRON Optical fiber sensor E32-A04. OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Optical system: positive and negative radiiation OMRON E32-A04.
Detection distance: 40 positive and negative 2.5mm.
Beam shape: linear beam.
Beam diameter: 2000mm * 35 M.
Resolution: 0.4 M.
Cable length: 4m.
...More relevant models >>>>