LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
OMRON E2A-M12KN08-M1-C2 Output configuration: PNP OMRON E2A-M12KN08-M1-C2
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M12KN08-M1-C2
Size: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 34 (48).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

Sensing method: Diffuse-reflective Sensors.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 200 mm.
Functions: Timer Self Diagnosis Turbo.
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Type: Mark-detecting models (blue LED).
Control output: ON/OFF output OMRON E2A-M12KN08-M1-C2.
Model: NPN output.
The Ultimate Fiber Amplifier for E2A-M12KN08-M1-C2
Maximum Ease of Use and High.
Performance. Appearance: Unshielded.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available OMRON E2A-M12KN08-M1-C2. Item: Single-function models.
Functions: --.
Model: NPN output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output OMRON E2A-M12KN08-M1-C2.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, xagonal bolts M4 (with spring and plain washers); Material, Iron, zinc plating; Count, 2 OMRON Cylindrical Proximity Sensor.
Applicable sensor (mounting pitch on sensor side): E3S-C (25.4).
Page: Dimensions, 8 OMRON Cylindrical Proximity Sensor.
Model: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available OMRON Cylindrical Proximity Sensor. Power supply voltage: DC24V.
Control output: NPN output. Appearance: Unshielded.

Sensing surface: Front E2A-M12KN08-M1-C2.
Sensing distance: 1.6 mm.
Output configuration: PNP.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Ammplifier OMRON E2A-M12KN08-M1-C2.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption.


...More relevant models >>>>
Last one: E2A-M12KN08-M1-B2
next one: E2A-M12LN08-M1-B2