Content: CNP2 connector two.
Purpose: MR-JE-200B to MR-JE-300B, MR-JE-200A to MR-JE-300A with. Motor series: low inertia, medium capacity.
Rated output power: 37.0kw.
Rated speed: 2000rpm.
With the brake: without.
Shaft end: straight shaft.
Brushless motor has small size, light weight, large output, fast response, high speed, small inertia, smooth rotation, and stable torque MITSUBISHI MR-EKCBL30M-H MR-EKCBL30M-H
Control is complex, easy to realize intelligent, and its electronic commutation method is flexible, can square wave commutation or sine wave commutation.
Motor maintenance free, high efficiency, low operating temperature, electromagnetic radiation is very small, long life, can be used for a variety of environments.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
At present, the general use of synchronous motor control, which is a large range of power,
Can do a lot of power MITSUBISHI MR-EKCBL30M-H.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation. Motor series: low inertia, medium capacity MITSUBISHI MR-EKCBL30M-H.
Rated output power: 8.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MITSUBISHI SSCNET III fiber MITSUBISHI SSCNET III fiber.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.6kw.
Interface type: SSCNET type III fiber communication.
Full closed loop control MITSUBISHI SSCNET III fiber.
Power specification: single phase AC200V.
High precision and high response location control.
Full closed loop control can be realized by double feedback control method.
Dual feedback control can be performed between the servo motor encoder and the load side encoder.
MR-J3-B-RJ006 can be used in cconjunction with a number of manufacturers of linear encoder,
Users can build the system according to their own accuracy requirements MR-EKCBL30M-H. ABS type linear encoder using serial interface,
No need to install the battery on the serrvo amplifier can easily build the absolute position detection system MITSUBISHI MR-EKCBL30M-H.
Flexible system configuration.
Can achieve higher load side positioning accuracy!