LK Automation Limited
MITSUBISHI GT1562-VNBA 84 Inch Touch Screen MITSUBISHI GT1562-VNBA
Brand:
MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT1562-VNBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 8.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
...More relevant models >>>>
Name: 8.4 Inch Touch Screen
Model: GT1562-VNBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 8.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
Protective film for 3.7 inch screen.
Transparent, 5.
Applicable model: GT1020. Application: save sampled data, alarm frequency, and alarm records.
The image data is stored in a built-in flash memory and can be maintained even at the end of the battery life.
Life expectancy is about 5 years.
Specifications: 850mA 3 MITSUBISHI GT1562-VNBA. 6V.
Application Series: F940WGOT, F940GOT. Protective film for 10 GT1562-VNBA4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. Protective film for 8.4 inch screen.
Scrub, 5.
Applicable model: GT15. 15 inches.
Applicable model: GT27. Series introduction: set a number of basic functions in a small body model.
Screen size: 3.7 inches.
Display color: monochrome.
Mounting type: panel mounting type MITSUBISHI GT1562-VNBA.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: white.
Power type: DC24V.
Communication interface: with built-in RS-232.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020) MITSUBISHI GT1562-VNBA.
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth MITSUBISHI 8 MITSUBISHI 8.4 Inch Touch Screen. 4 Inch Touch Screen. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Cable length: 30 meters.
QnACPU GOT MITSUBISHI 8.4 Inch Touch Screen.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does noot support Q00JCPU, Q00CPU, CPU Q01CPU direct connection GT1562-VNBA.
Applicable model: GT21. Application: installed on the surface of the panel or the use of L type mounting bracket,
So you can use a dedicated cable,
F9GT-HCAB-__M easilyy connect the hand-held GOT and RS-422 ports to connect / disconnect MITSUBISHI GT1562-VNBA.
Attachment: L type mounting bracket.
Application Series: hand held GOT (RH type).
Transparent, 5.
Applicable model: GT1020. Application: save sampled data, alarm frequency, and alarm records.
The image data is stored in a built-in flash memory and can be maintained even at the end of the battery life.
Life expectancy is about 5 years.
Specifications: 850mA 3 MITSUBISHI GT1562-VNBA. 6V.
Application Series: F940WGOT, F940GOT. Protective film for 10 GT1562-VNBA4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. Protective film for 8.4 inch screen.
Scrub, 5.
Applicable model: GT15. 15 inches.
Applicable model: GT27. Series introduction: set a number of basic functions in a small body model.
Screen size: 3.7 inches.
Display color: monochrome.
Mounting type: panel mounting type MITSUBISHI GT1562-VNBA.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: white.
Power type: DC24V.
Communication interface: with built-in RS-232.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020) MITSUBISHI GT1562-VNBA.
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth MITSUBISHI 8 MITSUBISHI 8.4 Inch Touch Screen. 4 Inch Touch Screen. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Cable length: 30 meters.
QnACPU GOT MITSUBISHI 8.4 Inch Touch Screen.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does noot support Q00JCPU, Q00CPU, CPU Q01CPU direct connection GT1562-VNBA.
Applicable model: GT21. Application: installed on the surface of the panel or the use of L type mounting bracket,
So you can use a dedicated cable,
F9GT-HCAB-__M easilyy connect the hand-held GOT and RS-422 ports to connect / disconnect MITSUBISHI GT1562-VNBA.
Attachment: L type mounting bracket.
Application Series: hand held GOT (RH type).
...More relevant models >>>>
Related download