LK Automation Limited
M7E-02DGN2 OMRON M7E-02DGN2 Digital Display
Brand:
OMRON
Name: Digital Display
Model: M7E-02DGN2
Display contents: Decimal.
Display color: Green (See note 1.).
Type: Negative.
Zero Suppression Incorporated.
Single-color (red or green) and two-color (red or green,
selectable) displays with a character height of 25 mm are,
available for a variety of applications and locations.
Miniature design with a 43-mm depth is perfect for saving,
space in equipment and devices.
A wide power supply range from 12 to 24 VDC.
Connectors are available, which allows easy maintenance.
Negative logic input.
...More relevant models >>>>
Name: Digital Display
Model: M7E-02DGN2
Display contents: Decimal.
Display color: Green (See note 1.).
Type: Negative.
Zero Suppression Incorporated.
Single-color (red or green) and two-color (red or green,
selectable) displays with a character height of 25 mm are,
available for a variety of applications and locations.
Miniature design with a 43-mm depth is perfect for saving,
space in equipment and devices.
A wide power supply range from 12 to 24 VDC.
Connectors are available, which allows easy maintenance.
Negative logic input.
Name: DIN Track.
Minimum order (unit): --.
Ordering Information. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cable sheath material: LSZH.
Cable color: Green.
Cable length: 10 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Time specification: Instantaneous type OMRON M7E-02DGN2.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC M7E-02DGN2
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase OMRON M7E-02DGN2.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON M7E-02DGN2. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Rated voltage: 230 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz OMRON Digital Display.
Rated current: 50 Hz, 0.052 A; 60 Hz, 0.045 A .
Rated input: 50 Hz, 12 W ; 60 Hz, 10 W .
Rated rotational speed: 50 Hz, 1700 r/min; 60 Hz, 2000 r/min OMRON Digital Display.
Maximum flow rate: 50 Hz, 1.3 m3/min; 60 Hz, 1.5 m3/min.
Maximum static pressure: 50 Hz, 19.6 Pa; 60 Hz, 23.5 Pa.
Noise: 50 Hz, 32 dB; 60 Hz, 34 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment OMRON Digital Display.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bbladed models,
(28 type) included in series M7E-02DGN2.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffied safety standards depend on the,
product OMRON M7E-02DGN2. Check the information given for available models of Axial fans and,
the information in Characteristics.
Minimum order (unit): --.
Ordering Information. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cable sheath material: LSZH.
Cable color: Green.
Cable length: 10 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Time specification: Instantaneous type OMRON M7E-02DGN2.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC M7E-02DGN2
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase OMRON M7E-02DGN2.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON M7E-02DGN2. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Rated voltage: 230 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz OMRON Digital Display.
Rated current: 50 Hz, 0.052 A; 60 Hz, 0.045 A .
Rated input: 50 Hz, 12 W ; 60 Hz, 10 W .
Rated rotational speed: 50 Hz, 1700 r/min; 60 Hz, 2000 r/min OMRON Digital Display.
Maximum flow rate: 50 Hz, 1.3 m3/min; 60 Hz, 1.5 m3/min.
Maximum static pressure: 50 Hz, 19.6 Pa; 60 Hz, 23.5 Pa.
Noise: 50 Hz, 32 dB; 60 Hz, 34 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment OMRON Digital Display.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bbladed models,
(28 type) included in series M7E-02DGN2.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffied safety standards depend on the,
product OMRON M7E-02DGN2. Check the information given for available models of Axial fans and,
the information in Characteristics.
...More relevant models >>>>