LK Automation Limited
KM20-CTF-400A Single-phase, 3-wire: 100/200 VAC Three-phase, 3-wire: 100 to 480 VAC OMRON KM20-CTF-400A Smart Power Monitor
Brand:
OMRON
Name: Smart Power Monitor
Model: KM20-CTF-400A
Rated primary current: 400 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.
...More relevant models >>>>
Name: Smart Power Monitor
Model: KM20-CTF-400A
Rated primary current: 400 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.
Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 OMRON KM20-CTF-400A.
Easy temperature and humidity control with an SD Card KM20-CTF-400A Easy and Quick "Checking Power"at the Worksite. Category: ontology; power monitoring.
Application circuit: single phase 2 wire; single phase 3 wire; three-phase 3 wire.
Supply voltage: AC100 ~ 240V (50/60Hz).
Output function: open collector output; cumulative output pulse output; alarm output.
Communication specifications: RS-485 OMRON KM20-CTF-400A.
Memory card function: have.
Simple monitoring of the use of electricity to support energy saving countermeasures.
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency.
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network OMRON KM20-CTF-400A.
Wide 45mm miniaturization, simple set to the DIN guide. Air purification unit.
Apply: 410mm.
Power specifications: DC24V OMRON Smart Power Monitor.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes OMRON Smart Power Monitor. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm), 50 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control. The temperature, humidity and differential pressure of the cleaning chamber and the simple cleaning room by usingg PC,
Power consumption and other manufacturing environment OMRON Smart Power Monitor KM20-CTF-400A.
Implement unified management software.
Centralized management of environmental information in the production site.
Real time analysis of meassurement data OMRON KM20-CTF-400A.
Installation site and measurement conditions can be understood through the map.
Can only be converted to the required data format Excel.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 OMRON KM20-CTF-400A.
Easy temperature and humidity control with an SD Card KM20-CTF-400A Easy and Quick "Checking Power"at the Worksite. Category: ontology; power monitoring.
Application circuit: single phase 2 wire; single phase 3 wire; three-phase 3 wire.
Supply voltage: AC100 ~ 240V (50/60Hz).
Output function: open collector output; cumulative output pulse output; alarm output.
Communication specifications: RS-485 OMRON KM20-CTF-400A.
Memory card function: have.
Simple monitoring of the use of electricity to support energy saving countermeasures.
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency.
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network OMRON KM20-CTF-400A.
Wide 45mm miniaturization, simple set to the DIN guide. Air purification unit.
Apply: 410mm.
Power specifications: DC24V OMRON Smart Power Monitor.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes OMRON Smart Power Monitor. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm), 50 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control. The temperature, humidity and differential pressure of the cleaning chamber and the simple cleaning room by usingg PC,
Power consumption and other manufacturing environment OMRON Smart Power Monitor KM20-CTF-400A.
Implement unified management software.
Centralized management of environmental information in the production site.
Real time analysis of meassurement data OMRON KM20-CTF-400A.
Installation site and measurement conditions can be understood through the map.
Can only be converted to the required data format Excel.
...More relevant models >>>>