LK Automation Limited
HG-JR1034B Ultra low inertia medium capacity servo motor MITSUBISHI HG-JR1034B
Brand:
MITSUBISHI
Name: High capacity servo motor in low inertia
Model: HG-JR1034B
Servo motor series: low inertia, medium and large capacity.
Rated output: 1.0kw.
Rated speed; 3000r/min.
Electromagnetic brake: incidental.
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers.
...More relevant models >>>>
Name: High capacity servo motor in low inertia
Model: HG-JR1034B
Servo motor series: low inertia, medium and large capacity.
Rated output: 1.0kw.
Rated speed; 3000r/min.
Electromagnetic brake: incidental.
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers.
MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 22.0kw.
SSCNET interface.
Voltage: 3 phase AC400V.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0 MITSUBISHI HG-JR1034B. 888ms.
Such systems will be able to provide high reliability and high performance HG-JR1034B
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise MITSUBISHI HG-JR1034B.
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit.
It is only necessary to add a battery on the servo amplifier, which can form the absolute value system.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use.Type: MR-J_B series.
Rated output: 2.0KW.
Interface: standard MITSUBISHI HG-JR1034B.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object MITSUBISHI Ultra low inertia medium capacity servo motor.
Servo system must have good controllability, high stability and high adaptability MITSUBISHI Ultra low inertia medium capacity servo motor.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic MITSUBISHI Ultra low inertia medium capacity servo motor.
If the servo system is divided according to the function, then theere is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system HG-JR1034B.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MITSUBISHI HG-JR1034B.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
Rated output: 22.0kw.
SSCNET interface.
Voltage: 3 phase AC400V.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0 MITSUBISHI HG-JR1034B. 888ms.
Such systems will be able to provide high reliability and high performance HG-JR1034B
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise MITSUBISHI HG-JR1034B.
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit.
It is only necessary to add a battery on the servo amplifier, which can form the absolute value system.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use.Type: MR-J_B series.
Rated output: 2.0KW.
Interface: standard MITSUBISHI HG-JR1034B.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object MITSUBISHI Ultra low inertia medium capacity servo motor.
Servo system must have good controllability, high stability and high adaptability MITSUBISHI Ultra low inertia medium capacity servo motor.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic MITSUBISHI Ultra low inertia medium capacity servo motor.
If the servo system is divided according to the function, then theere is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system HG-JR1034B.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MITSUBISHI HG-JR1034B.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
...More relevant models >>>>