LK Automation Limited
HC-SF201 Low inertia small capacity motor MITSUBISHI HC-SF201 Shaft end: straight shaft
Brand:
MITSUBISHI
Name: Medium inertia medium capacity motor
Model: HC-SF201
Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 2.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft.
The structure of the AC servo motor stator is basically similar to the capacitor split phase single-phase induction motor.
The stator is provided with two positions of 90 degrees of mutual difference of the winding, one is the excitation winding Rf, it is always connected to the AC voltage Uf;
The other is to control the winding L, which is connected to the control signal voltage Uc.
So the AC servo motor, also known as the two servo motor.
...More relevant models >>>>
Name: Medium inertia medium capacity motor
Model: HC-SF201
Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 2.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft.
The structure of the AC servo motor stator is basically similar to the capacitor split phase single-phase induction motor.
The stator is provided with two positions of 90 degrees of mutual difference of the winding, one is the excitation winding Rf, it is always connected to the AC voltage Uf;
The other is to control the winding L, which is connected to the control signal voltage Uc.
So the AC servo motor, also known as the two servo motor.
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 37.0kw.
Interface type: SSCNET type III fiber communication.
Special features: integrated driver security.
Power specification: three phase AC200V.
STO function as a security feature is added to the SSCNET III fiber communication type servo amplifier MITSUBISHI HC-SF201.
By using the STO function, the electromagnetic contactor used in the past to prevent the motor from accidentally starting is no longer needed HC-SF201
SS1 functions can be realized by using the MR-J3-D05 security logic unit.
MR-J3-BS uses a full closed loop control system.
Compatibility with MR-J3-B.
MR-J3-BS installation, wiring and connectors are the same as the MR-J3-B, so do not change the existing connection will be easy to MR-J3-B
Change to MR-J3-BS MITSUBISHI HC-SF201.
Security functions are connected to the CN8 interface through an external security circuit to increase the MR-J3-BS driver security.
Compatible full closed loop control system.
MR-J3-BS has a full closed loop control system version. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 0 MITSUBISHI HC-SF201. 2kw.
Universal interface.
Voltage: 3 phase AC200VAC or single phase AC230V.
Super function, excellent performance.
High performance CPU integration, greatly improve product responsiveness.
Due to the application of high performance CPU, so that the response can be greatly improved MITSUBISHI Low inertia small capacity motor.
Speed loop frequency response increased to more than 550HZ.
MR-J2-Super series is the best device for high speed positioning applications MITSUBISHI Low inertia small capacity motor.
Easy adjustment.
Model adaptive control / advanced real time automatic tuning. Cable length: 5m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-KFS; HC-MFS; 3000r/min HC-UFS servo motor.
-L represents bending life. SSCNET III connector kitMotor series: low inertia, medium capacity MITSUBISHI Low inertia small capacity motor.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo mottor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttarget value, the driver adjusts the rotation angle of the rotor MITSUBISHI HC-SF201 HC-SF201.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
Rated output: 37.0kw.
Interface type: SSCNET type III fiber communication.
Special features: integrated driver security.
Power specification: three phase AC200V.
STO function as a security feature is added to the SSCNET III fiber communication type servo amplifier MITSUBISHI HC-SF201.
By using the STO function, the electromagnetic contactor used in the past to prevent the motor from accidentally starting is no longer needed HC-SF201
SS1 functions can be realized by using the MR-J3-D05 security logic unit.
MR-J3-BS uses a full closed loop control system.
Compatibility with MR-J3-B.
MR-J3-BS installation, wiring and connectors are the same as the MR-J3-B, so do not change the existing connection will be easy to MR-J3-B
Change to MR-J3-BS MITSUBISHI HC-SF201.
Security functions are connected to the CN8 interface through an external security circuit to increase the MR-J3-BS driver security.
Compatible full closed loop control system.
MR-J3-BS has a full closed loop control system version. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 0 MITSUBISHI HC-SF201. 2kw.
Universal interface.
Voltage: 3 phase AC200VAC or single phase AC230V.
Super function, excellent performance.
High performance CPU integration, greatly improve product responsiveness.
Due to the application of high performance CPU, so that the response can be greatly improved MITSUBISHI Low inertia small capacity motor.
Speed loop frequency response increased to more than 550HZ.
MR-J2-Super series is the best device for high speed positioning applications MITSUBISHI Low inertia small capacity motor.
Easy adjustment.
Model adaptive control / advanced real time automatic tuning. Cable length: 5m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-KFS; HC-MFS; 3000r/min HC-UFS servo motor.
-L represents bending life. SSCNET III connector kitMotor series: low inertia, medium capacity MITSUBISHI Low inertia small capacity motor.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo mottor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttarget value, the driver adjusts the rotation angle of the rotor MITSUBISHI HC-SF201 HC-SF201.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
...More relevant models >>>>